Sanyo VPC CG6 Owners Manual - Page 120
Press shutter to save
UPC - 683728123048
View all Sanyo VPC CG6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
5 Specify the start point of the extract. h Use the procedure below to specify the frame from which the video clip extract will start. h Play the video clip until approximately the desired point, pause the video clip, then play the video clip one frame at a time, stopping at the start point of the extract. This will be the first frame of the extract. h If the start point of the video clip is also the start point of the extract, proceed to step 6. Play: After pausing playback, press and hold the SET button to the right for about 2 seconds for forward playback, or to the left for reverse playback. Pause: During playback, press the SET button. Accelerated playback: During playback, toggle the SET button to the left or right to change the playback speed. Single frame: After pausing playback, toggle the SET button to the right to move forward one frame, or to the left to move back one frame. 6 Toggle the SET button up. h The start point of the video clip Approximate playback time extract is set, and the screen to CUT 00:01:10 specify the end point appears. h Specify the end point of the extract by following the same procedure as in step 5. 1 Toggle the SET button down. h The portion to be deleted Press shutter to save switches to the extracted End point portion. h Each time the SET button is Portion to be deleted toggled down, the sections to delete and the sections to save are reversed. 2 Specify the end point of the extract. The frame following the end point of the extract will be the start point of the latter portion to be joined. English 106