Sanyo VPC CG6 Owners Manual - Page 94

ISO SENSITIVITY With the initial settings, the ISO sensitivity is automatically set according to the brightness of the subject. However, the ISO sensitivity can be set to a fixed setting. 1 Display PAGE 2 of the RECORDING MENU (page 60). 2 Select the ISO sensitivity menu. t: Sets the ISO sensitivity automatically (equivalent to ISO 50 to 400 [video clip recording mode: ISO 450 to 3600]). *: Sets the sensitivity to ISO 50 equivalent (video clip recording mode: ISO 450). u: Sets the sensitivity to ISO 100 equivalent (video clip recording mode: ISO 900). v: Sets the sensitivity to ISO 200 equivalent (video clip recording mode: ISO 1800). w: Sets the sensitivity to ISO 400 equivalent (video clip recording mode: ISO 3600). 6: Sets the sensitivity to ISO 800 equivalent (video clip recording mode: ISO 3600). -: Sets the sensitivity to ISO 1600 equivalent (video clip recording mode: ISO 3600). 3 Select the desired icon from the ISO sensitivity menu, and press the SET button. h This completes the ISO sensitivity setting. HINT i By setting a higher ISO sensitivity, you can set higher shutter speeds and capture images in darker locations, but noise in the captured images may increase. i By assigning an operation shortcut to the SET button (page 132), you can change the ISO setting from the Shooting Screen. CAUTION Does the image appear to flicker when recording a video clip? i If recording a video clip under fluorescent lights with the ISO sensitivity set to w or higher, a noticeable flicker may appear in the image. English 80