Sanyo VPC HD1 Instruction Manual, VPC-HD1A - Page 65

SHOOT A STILL IMAGE WHILE RECORDING A VIDEO CLIP You can capture a still image (a single-shot) while recording a video clip. 1 Press the ON/OFF button for at least 1 second to turn the camera on. 2 Set the main switch to REC. Video clip recording button [ ] Still image shooting button [] 3 Press the video clip recording button [ ]. 4 When you see a scene you'd like to capture as a still image, press the still image shooting button [ ]. 5 End the recording. h Press the video clip recording button to stop recording. Main switch 00:00:09 CAUTION i When shooting a still image while recording a video clip, the flash does not operate. i When shooting a still image while recording a video clip, the display briefly pauses, and then returns to the video clip display after the still image is captured. i If the still image resolution is set to v, it automatically changes to r and the image is captured. i When the remaining video recording time becomes approximately 50 seconds, it will no longer be possible to capture a still image while recording a video clip. The exact remaining recording time at which this occurs will differ depending on the subject and on the video clip mode setting (page 71). If you intend to capture a still image while recording a video clip, it is suggested that you take note of the remaining video recording time. 51 English