Sanyo WXE45 User Manual - Page 13
Installation, Positioning the Projector, Adjustable Feet
UPC - 086483072819
View all Sanyo WXE45 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation Positioning the Projector For the projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. Note: •This projector is not equipped with an optical zoom. To adjust the screen size, change the throw distance. •The brightness in the room has a great influence on picture quality. It is recommended to limit the ambient lighting in order to get the best image. •All measurements are approximate and may vary from the actual sizes. 3.927' (119.7 cm) (Inch Diagonal) 2.826' (86.1 cm) 110" 1.726' (52.6 cm) 80" 50" Screen Size (W x H) mm 16:10aspect ratio 50" 1077 x 673 80" 1723 x 1077 110" 2369 x 1481 Throw distance 1.726' (52.6 cm) 2.826' (86.1 cm) 3.927'(119.7 cm) A 0.623' (19.0 cm) 0.846' (25.8 cm) 1.069' (32.6 cm) Adjustable Feet Projection angle can be adjusted up to 10.0 degrees with the adjustable feet. 1 Lift the front of the projector and pull the feet lock latches on both sides of the projector upward. 2 Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to adjust the position and tilt. 3 To retract the adjustable feet, lift the front of the projector and pull and undo the feet lock latches. Keystone distortion of the projected image can be corrected by remote control operation or menu operation (pp.22, 41). Adjustable Feet A Feet Lock Latches 13