Sanyo WXE45 User Manual - Page 9

Rear Terminal ① ② ③ Part Names and Functions ④ ⑤⑥ ⑦ (VARIABLE) COMPUTER IN 2 / MONITOR OUT R AUDIO OUT VIDEO IN S-VIDEO IN L COMPUTER / (MONO) COMPONENT AUDIO IN ⑨ ⑧ ① COMPUTER IN 1/COMPONENT IN Connect output signal from a computer, RGB scart 21-pin video output, or component video output to this terminal (pp.14, 16). When the cable is of the longer variety, it is advisable to use this terminal and not COMPUTER IN 2/MONITOR OUT. ② SERVICE PORT When controlling the projector from a computer, connect the computer to this connector with a control cable. ③ LAN Connection Terminal  Connect the LAN cable (Refer to the owner's manual of "Network Set-up and Operation".). ④ COMPUTER IN 2/MONITOR OUT This terminal is switchable and can be used for input from a computer or output to the other monitor. Set the terminal up as either Computer input or Monitor output properly. [Used for Monitor out, this terminal outputs only incoming signal from COMPUTER IN 1/COMPONENT IN terminal (pp. 14, 44)]. ⑥ AUDIO IN Connect the audio output from video equipment connected to ⑤ or ⑨ to this jack. [When the audio output is monaural, connect it to L (MONO) jack (p.15). ⑦ AUDIO OUT (VARIABLE) Connect an external audio amplifier to this jack (pp.14 - 16). This terminal outputs sound from AUDIO IN terminal (⑥ or ⑧). ⑧ COMPUTER/COMPONENT AUDIO IN Connect the audio output (stereo) from a computer or video equipment connected to ① or ④ to this jack (pp.14, 16). ⑨ VIDEO IN Connect the composite video output from video equipment to VIDEO jack (p.15). ⑤ S-VIDEO IN Connect the S-VIDEO output from video equipment to this jack (p.15).