Sanyo WXE45 User Manual - Page 52

Down The New Pin Code And Keep It Securely., Of The Alarm Function Can No Longer

Page 52 highlights

Antitheft Alarm Function Settings Change the PIN code 1 Press the F button and enter the four-digit PIN code within about 10 seconds. The ALARM indicator blinks red for a few seconds and high-pitched confirmation sound is made. 2 While the indicator is blinking, enter new PIN code then you will hear the high-pitched confirmation sound and the ALARM indicator is off. When typing an incorrect PIN code, you will hear lowpitched sound. If you enter incorrect PIN codes 3 times, the alarm starts ringing. A PIN code for Antitheft alarm function is the combination of 1, 2, or 3. Enter the PIN code with the button 1, 2, and 3. The default PIN code is set as "1111". Reset the settings Select Factory default in the Setting menu to reset the settings for the Antitheft alarm function. Note: • This is effective only when the Antitheft alarm setting is released. • You can make some more detailed settings. (p. 48) caution: when you have changed THE PIn code, write down the new pin code and keep it securely. If you forget your PIN code, some settings of THE ALARM function can no longer be changed. Side Control F button button 1, 2, 3 ALARM indicator 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71

CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE AND KEEP IT SECURELY.
IF YOU FORGET YOUR PIN CODE, SOME SETTINGS
OF THE ALARM FUNCTION CAN NO LONGER BE
CHANGED.
Chan�e the PIN code
Press the F button and enter the four-digit PIN code
within about 10 seconds.
The ALARM indicator blinks
red for a few seconds and high-pitched confirmation
sound is made.
Settin�s
Reset the settin�s
Select Factory default in the Setting menu to reset the
settings for the Antitheft alarm function.
Side Control
1
2
While the indicator is blinking, enter new PIN code then
you will hear the high-pitched confirmation sound and
the ALARM indicator is off.
When typing an incorrect PIN code, you will hear low-
pitched sound.
If you enter incorrect PIN codes 3
times, the alarm starts ringing.
A PIN code for Antitheft alarm function is the
combination of 1, 2, or 3.
Enter the PIN code with
the button 1, 2, and 3.
The default PIN code is set as
"1111".
Note:
• This is effective only when the Antitheft alarm setting is
released.
• You can make some more detailed settings.
(p. 48)
ALARM
indicator
F button
button 1, ±, ²
Antitheft Alarm Function