Sanyo WXE45 User Manual - Page 48

Setting Change the PIN code The PIN code can be changed to your desired four-digit number. Select "PIN code change" with the Point ▼ button, and press the SELECT button to display the New PIN code input dialog box. Select a number by pressing the Point ▲▼ buttons. And then press the Point ► button to fix the number and move the pointer. Repeat it to complete entering a fourdigit number. After entering the four-digit number, move the pointer to "Set" by pressing the Point ► button. Then press the SELECT button. caution: when you have changed THE PIn code, write down the new pin code in column of the pin code no. memo on page 70, and keep it securely. If you forget your PIN code, the projector can no longer be started. Alarm Make some settings for the Antitheft alarm function. (pp. 51-53) Press the SELECT button at Alarm icon to display the Alarm setting box. When the Antitheft alarm function is set, "On" is displayed. When the function is released, "Off" is displayed. See p. 51 to set or release this function. Select Alarm volume, Sensitivity or Ringing time with the Point ▲▼ buttons, and set each item with the Point ◄► buttons. Alarm volume Small Medium Large Sensitivity Low Less sensitive. Medium Normal sensitive. High Highly sensitive (default setting). Ringing time 10 seconds ...... Default setting. Ring about 10 seconds. 60 seconds ...... Ring about 60 seconds. Long time......... Ring until the end of the battery life. 48 Change the PIN code Select PIN code change and press the SELECT button. The New PIN code input dialog box appears. The input numbers are being displayed for confirmation. Alarm Press the SELECT button at the Alarm icon to display the Alarm setting box. Alarm volume Sensitivity Ringing time Set Sensitivity or Ringing time with the Point ◄► buttons. Note: •The Alarm icon becomes gray and cannot be selected when the Antitheft alarm function is "On", a battery is not installed, or the battery is coming to the end of its life. •While the Alarm icon is selected, the Antitheft alarm setting buttons on the side panel cannot be operated. •When selecting "Long time" in Ringing time, the length of alarm ringing time differs depending on the battery life.