Sanyo WXE45 User Manual - Page 33

Computer Input Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds and then the Aspect dialog box appears. Scale H/V.........Adjust the Horizontal/Vertical screen scale. H&V When set to "On," the aspect ratio is fixed. "Scale V" appears dimmed and becomes unavailable. Adjust "Scale H," then the screen scale is automatically modified based on the aspect ratio. Position H/V......A djust the Horizontal/Vertical screen position. Common......... S ave the adjusted scale to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at "Yes." When Custom is selected, the saved scale is used. Reset R eset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at "Yes." For zooming in and out the images Digital zoom + When Digital zoom + is selected, the On-Screen Menu disappears and "D. zoom +" is displayed. Press the SELECT button to expand the image size. Use the Point buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM ▲ button on the remote control. Digital zoom - When Digital zoom - is selected, the On-Screen Menu disappears and "D. zoom -" is displayed. Press the SELECT button to compress image size. The projected image can be also compressed by pressing the D.ZOOM ▼ button on the remote control. To exit the Digital zoom +/- mode, press any button except the D.ZOOM ▲▼, SELECT, and Point buttons. To return to the previous screen size, select a screen size in the Screen Size Adjustment or select an input source from the Input Source Selection (p.25) again, or adjust the screen size with the D.ZOOM ▲▼ buttons. Press the SELECT button at Common or Reset, to display a confirmation box. Note: •When no signal is detected, "Normal" is set automatically and the Aspect dialog box disappears. •The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. •When "Custom" is selected , "Digital zoom -" is invalid. Remote Control POINT buttons SELECT button D.ZOOM + button D.ZOOM - button Note: •The panning function may not operate properly if the stored Mode in the PC Adjust Menu is used (p.29). •The minimum compression ratio can be limited depending on the input signal or when the Keystone function is working or when the custom is selected for the screen size. •The items will be same as the items in video source when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the PC system Menu (p.26). •Digital zoom +/- cannot be selected when Full or True is selected. •When "Custom" is selected , "Digital zoom -" is invalid. •True, Full and D.Zoom+/- are not available when the 4:3 or 16:9 function is selected in the Screen aspect (p.44). 33