Sanyo WXU700 Instruction Manual, PLC-WXU700 Network Set Up Windows
Sanyo WXU700 - WXGA LCD Projector Manual
UPC - 086483074219
View all Sanyo WXU700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo WXU700 manual content summary:
- Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 1
This is the manual for the Network function. Read this manual thoroughly to operate the Network function. First, read the owner's manual of the projector to understand the basic operation of the projector and the safety instructions. The safety instructions in the owner's manuals should be followed - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 2
projector provides the wireless LAN module which complies with the module certification. Federal Communications Commission Notice This equipment has been tested the instructions, may Sanyo Responsible party : SANYO RF interference suppression. For Canadian Users This Class B digital apparatus - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 3
WLAN Module (1AV4U19B25500) je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk Undertegnede SANYO FISHER Sales (Europe) GmbH, erklærer herved, at følgende udstyr WLAN [Danish] Module (1AV4U19B25500) overholder de væsentlige krav og øvrige relevante krav - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 4
Microsoft, Windows, Owner's Manual is either a registered trademark or a trademark of its respective corporation. Notes - The contents of this manual manual This manual does not provide the description of basic operation and functions for computer, web browser, projector and network. For instructions - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 5
instructions...4 Table of contents...5 Operating environment and configuration 8 Required operating environment for computers 8 Network specifications of the projector 9 Useful guide to the network screen............23 Network connection standby display...24 Network Capture 5 window...25 4. - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 6
Browser...46 How to use the setting page...48 Initial setting...50 Network configuration...53 Configuring wireless LAN setting and security setting 55 E-mail setting...57 SNMP setting...61 7. Controlling the projector 65 Power control and status check...66 Controls...68 PC adjustment...72 Setting - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 7
119 Using the Network Viewer function...124 Use of the projector as FTP server...130 10. N etwork Projector [Windows Vista 133 Use of "Connect to a Network Projector 134 11. Appendix 137 Use of telnet...138 Web browser setting...140 Firewall setting...145 Troubleshooting...146 Terminology...152 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 8
When operating the projector via the networks, computers should meet the operating environment below. OS CPU Memory Free HDD Space Screen Resolution Communication Protocol Network Correspond Wireless LAN Wired LAN Browser Application Microsoft Windows 2000 or Microsoft Windows XP or - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 9
Network specifications of the projector LAN Terminal Data communication speed Protocol 100Base-TX (100Mbps)/10Base-T (10Mbps) TCP/IP Wireless LAN Interface Communication Mode Data Transfer Speed Wireless Frequency (Channel) Modulation Form Protocol Security Service area IEEE802.11b/g, - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 10
Useful guide to the network function This manual describes the operation procedure of the projector's network menu and the provided application software for Windows users. Please refer to this manual depending on the situation. l How to project the computer screen's image via the network To project - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 11
1 Chapter 1. About LAN functions This chapter describes the features, the mechanism, and connection procedures of the LAN. 11 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 12
Chapter 1 About LAN functions LAN functions and the features This product is loaded with a LAN network function which enables you to project an image on the computer through a projector via Network with dedicated software. With the software, you can also manipulate the projecting image and the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 13
example of the projection via the LAN. You can project the image on Computer (1) (Wired LAN connection), or Computer (2) (Wireless LAN connection) through the selected projector . 2.0 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.0 0.0 2.0 1.5 1.0 0.5 0.0 Computer (1) Access point Computer (2) 13 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 14
communication mode corresponded computer: Infrastructure ■ Wireless LAN, AdHoc Communication Mode Communication mode between Wireless LAN equipment. (Communication mode via SSID/ESSID) Network Projector Wireless communication mode :AdHoc Wireless communication mode corresponded computer: AdHoc 14 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 15
via the LAN line. LAN connection modes Computer(1) Computer(2) Computer (3) ✳ Operate the computer mouse with the remote control. When the projector's remote control employs mouse operating function, you can operate the computer by the remote control. To use the remote control, point to - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 16
Chapter 1 About LAN functions 16 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 17
2 Chapter 2. Setup procedures This chapter describes how to install the Network Capture 5 software and how to set up the networks. 17 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 18
be done with a browser later. First, complete the Wired or Wireless LAN connection between computers and projectors, then start browser configurations. ➔ "6. Basic setting and operation" (pp.45-64). STEP 3 Network Configuration has completed. Follow each chapter to project an image and operate the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 19
is required to install the software into your computer to use the Network Capture function . Please install the software as follows. Note: To install the software into the computer with Windows 2000, Windows XP or Windows Vista, you should logon as administrator. Before installation, make sure that - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 20
Agreement" will appear, read contents carefully and click Yes button if you agree to the license agreement to proceed with installing. During the installation, following window may appear, click Continue Anyway button. 3 Click Finish to complete the installation. 20 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 21
sound of the computer and serves them to the projector via the network. ● Network Viewer 5 (File Converter 1): Converts to the JPEG*1 data format which can be projected with the projector from the JPEG, bitmap and Power Point files. ● Network Viewer 5 (Program Editor) : This is a tool to make the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 22
on the language selection window and then click Install button to start installing. Installed software and places Network Viewer 5 (File Converter projector from any of the documents created by the application software. * To uninstall Network Viewer 5 (File Converter 2), just delete the "Network - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 23
3 Chapter 3. Names and functions of the operation screen This chapter describes the functions of each part of the operation screen. 23 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 24
and select either "Wired" or "Wireless" from the input menu of the projector. The "Please wait..." message will be displayed on the screen. After short time, the network connection standby display screen will appear as below. While the "Please wait..." message is shown, some operations are invalid - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 25
q Search PJ button Search the projector connected to the networks. w Specify IP button When connected to a different segment network, the projector can not be retrieved automatically. In that case, press this button, the "Search specified IP address list" window appears, and then click Add button - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 26
button Register a computer user as a moderator. !2 Join moderator's group button Join the moderator's group which is selected in the Network Projector list. It is not available if there is no moderator registered. !3 Parameter setup button Activate the parameter setup window, and execute the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 27
4 Chapter 4. Wired LAN configurations This chapter describes the preparation for Wired LAN setting with projectors and how to set the LAN environment. 27 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 28
. ** Please use a shielded LAN cable . * When the LAN setting is "Off", the two lamps will not be on. Network environment settings Set the Wired LAN network through the projector menu. Detailed network settings will be made with browser. Refer to "6. Basic setting and operation" (p45-64). First - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 29
DHCP function On or Off. When you setup the network setting manually, select "Off". When it is set On, IP address, Subnet, Gateway and DNS are automatically set according to your network environment *1. IP address Sets IP address of the projector Subnet Sets Subnet mask. Normally sets 255.255.255 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 30
separated by the router, see next page. When Firewall function (Anti-virus software) is effective, network projector may not be found. In that case, disable the Firewall function and try searching again. ✳ If the projector is named, the name will be displayed. The name can be set with the following - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 31
is closed. 3. Click OK button on the "Search specified IP address" window, the registered multiple projectors will be searched. Then, the projector will be added on the Network Projector List of the application window. Network Projector list Specify IP button "Search specified IP address - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 32
PIN code is to restrict the access from the networks to the projector. After setting the Network PIN code, you need to enter it to operate the projector via the networks. 1. Select "Network PIN code" in the Network menu, and press SELECT button. The Network PIN code screen will appear. 2. Set the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 33
Wired factory default Wired LAN factory default settings Select "Wired factory default" in the Network menu and press SELECT button. All the wired LAN settings will go back to the factory default settings. For details, refer to "Wired LAN factory default settings" (p.34). 33 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 34
Chapter 4 Wired LAN configurations Wired LAN factory default settings Parameter Wired 1 SELECTED LAN Wired 2 IP CONFIGURATION MANUAL DHCP Wired 3 MANUAL IP ADDRESS 169.254.100.100 192.168.100.100 192.168.100.100 SUBNET MASK 255.255.0.0 255.255.255.0 255.255.255.0 GATEWAY - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 35
preparation for Wireless LAN setting with projectors and how to set the LAN environment. This projector contains the Wireless LAN module. The computer has to be equipped with a Wireless LAN card adapter which supports IEEE 802.11b/g/n(DRAFT 2.0). If connecting in Infrastructure mode with an access - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 36
performing the steps in "6. Basic setting and operation." Setting procedures 1. Turn on the projector and select "Network" in the Input menu of the projector. 2. Select "LAN mode select" in the Network menu, and press Point 8 or SELECT button. 3. S elect similar LAN environment among Wireless - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 37
of WEP, WPA-PSK, WPA2-PSK security, select "Next". Refer to "Configuring security with the projector" on next page for details. Item Description DHCP Sets DHCP function On or Off. When you setup the network setting manually, select "Off". When its set On, IP address, Subnet, Gateway and DNS are - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 38
adjust setting; use the Point 7 8 buttons to move among the character positions of the key entry fields. This projector provides the following security options. Use optimum security option on your network environment. WEP64(40)bit Open WEP64(40)bit Share WEP128(104)bit Open WEP128(104)bit Share WPA - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 39
Configuring security with the projector Use of security type "WEP" 1. Use the Point ed buttons to select "WEP" security type. 2. Select "Key index". Use the press SELECT button to return to the Wireless setting screen. Select "Set" in the Wireless setting screen to complete the network setting. 39 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 40
digits Hex code.........64 digits * Security "WPA-PSK" and "WPA2-PSK" modes are not available when the "AdHoc" network type is selected. * When you set the PSK keys with 64 digits, the projector checks whether all of the entered PSK keys are in Hex code or not. If any of the ASCII - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 41
logged in by Administrative right with Windows XP and Windows Vista, and cannot be used with Windows 2000. Windows XP should be Service Pack 1 or later version. Setting Procedures 1. Turn on the projector and select "Network" in the Input menu of the projector. 2. Select "LAN mode select" in the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 42
PIN code is to restrict the access from the networks to the projector. After setting the Network PIN code, you need to enter it to operate the projector via the networks. Select "Network PIN code" from the projector menu and press SELECT button. Set with the same procedures as setting Wired LAN - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 43
wireless communication is established with the access-point or computer in the network, the WIRELESS indicator on the front panel lights up. When sending or receiving of data, it blinks. Even though the wireless LAN in the network menu is selected, the WIRELESS indicator does not light, in this case, - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 44
Items Wireless 4 Selected LAN Wireless 5 Wireless Simple IP CONFIGURATION MANUAL DHCP MANUAL IP ADDRESS 169.254.100.100 192.168.100.100 169. 255 255.255.255.255 255.255.255.255 WIRELESS CHANNEL 11 11 11 NETWORK TYPE WIRELESS SSID/ESSID (SSID/ESSID) WEP (WEP encryption) WPA-PSK (PSK - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 45
Describes basic operation and settings below by using the web browser. • Initial setting Setup the basic setting such as Projector name, Network PIN code, Time setting, etc. • Network setting Configure Wired/Wireless LAN environment. • E-mail Setting Configure E-mail function to manage the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 46
page, the authentication window will appear. In that case, type "user" onto the User Name text area and the login Network PIN code onto the Password text area and then click OK button. * The entered User Name must be "user" and it can not be changed. [Note] When the projector is accessed for the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 47
. Main menu For selection of control and setting items of the projector. Setting page Displays the control and setting items according to the (p.50) ✐T his Standard mode display is mainly used through this manual for the setting and control description. ✐If your computer does not have - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 48
Flash Player. You need to install the Adobe Flash Player. (☞p.47) The network viewer function in the Light mode has following limitations; - Cannot select the up the projector, use the setting menus on the web browser. The basic operation and procedures commonly used on this manual are described - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 49
Type of the setting pallet Text box setting Enter the number or text and then click Set button. or Change a value with s or t button and then click Set button. The value changes quickly when s or t button is kept pressing. Pull-down menu setting Select an item with pull-down menu button and then - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 50
or Japanese. Model name Indicates the model name of the projector. Projector name.......Sets the name of projector. This projector name is listed on the application window of the Network Capture software. Network PIN code Sets the Network PIN code to login the setting page (+p.32, p.42) PJLink - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 51
owner's manual for further details of the PJLink function. ✐ 1 to 32 alphanumeric characters can be used for the password. What's PJLink? The projectors equipped with PJLink function can be used together on the same network, regardless of model or brand, for centralized control and monitoring - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 52
appears when time is set up correctly. Current time Indicates current date and time set on the projector Date Sets date in manual Time Sets time in manual Date and time setting NTP is abbreviated expressions of Network Time Protocol. It is a protocol to acquire the exact current time via the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 53
main menu. The following setting page is displayed. Set up the projector's network environment on this Setting sub menu. Setting of LAN 1. Select and Simple IP configuration......Sets DHCP or Manual IP address Sets IP address of the projector Subnet mask............Sets Subnet mask. Default gateway - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 54
your DHCP server. When selecting "Manual", configure all the items manually. For further information, contact your network administrator. The address must be value. 4. To apply the setting, press Set button. The network of the projector starts re-booting and applies the setting. It takes about 20 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 55
Mode.........Select the Communication standard 802.11b or 802.11b/g/n. Network Type..........Select either "Infrastructure" or "AdHoc". When selecting between upper case and lower case characters. Channel If you use the projector in 802.11AdHoc mode, select the channel, from 1 to 11. - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 56
Click page [3] of setting pages. Following wireless LAN security setting can be done. After completing the configuration, press Set button. Item Description Network security....Sets the type of encryption. Following types are available. WEP64(40)bit Open WEP64(40)bit Share WEP128(104)bit Open - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 57
alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click E-mail the DNS server and SMTP server cannot be used in your network environment. ✐ The projector does not send message to the address set in "Administrator address - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 58
goes out o When Power management function turns PJ without user operation. "When PJ is turned into lamp off. o When the signal is interrupted. o When Auto Play is failed. Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 59
Also see the owner's manual of the projector for further details. ● When internal PJ power circuit is failed: TITLE: Message from projector 10-03-2007 00:59 Projector Model Name: model name TCP/IP: 192.168.1.201 Projector Name: Proj05 It sends you following message. *The Projector lamp is turned - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 60
it with a new lamp immediately and reset the lamp counter. If the projector is used without resetting the lamp counter, the alert mail is sent to users in every power-on of the projector. This alert mail will not be sent when the mail sending condition "When the life span of lamp is reached" is - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 61
setting This product provides a SNMP (Simple Network Management Protocol) agent function. The SNMP consists item. PJ information Item Description Contact Enter user name of the projector etc. (optional) Place Enter place of the projector (optional) Community name(refer Enter community name - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 62
Chapter 6 Basic setting and operation Trap Item Description Community name Enter community name to send "Trap". Default name is "public". Trap address Enter IP address of the SNMP manager computer to receive "Trap". Up to 10 address can be registered. ✐ Up to 10 trap addresses can be - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 63
lamp Corres. Value reaches [ ] hours. ✐ "When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector the auto display operation using with the network viewer function (+p.113). For further information - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 64
Chapter 6 Basic setting and operation 64 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 65
7 Chapter 7. Controlling the projector Describes controlling and setting of the projector by using the web browser. 65 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 66
or Standby button on the page, the power of the projector can be controlled. Confirmation window as shown in the below appears when the Standby button is pressed. Popup confirmation window Item Description PJ status Power Displays the status of the lamp. (ON, OFF, On starting up, On cooling down - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 67
control it through the network. To control the projector through the network, unlock the security on the projector using with the projector's menu control. Caution about turning on/off the projector via the networks When turning on/off the projector via the networks, preset the projector as follows - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 68
change pages and select desired setting items. ✐ Please see the owner's manual of the projector to have the further informa- tion of each control item. Network : Network ✐ The control page displays valid control items depending on the selected input mode, signal or functions of the projector - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 69
Controls System This function is to select the system of signal input to the projector. The available system mode are listed on the pull-down menu button according to the input signal. Select a system and then click Set button. Available - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 70
Chapter 7 Controlling the projector Image adjustment This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 71
Controls Sound This function is to adjust the sound of the projector. The values in the text box represent the current control value or status. Item Description Volume Adjusts the sound volume from the speakers. Mute Suppresses the sound. 71 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 72
PC adjustment Click PC Adj. on the main menu. This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Item Description Current mode...........Displays a current mode like VGA, SVGA, XGA, SXGA, UXGA, WXGA, etc. or - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 73
Click Setting on the main menu. This function is to set up the projector. Select the sub menu [Screen setting], [Setting 1] or , [Setting 2] and then set up each setting. Item Description Screen Switches the screen mode. There may not - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 74
Description Language Sets the language display of projector's on-screen display menu. Auto setup Executes . Standby mode........Sets the network function enable or disable in the standby mode. Normal..... Enable Eco Disable Lamp control...........Selects the lamp control mode. Remote control - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 75
the time to indicate the filter warning message on the screen. Item Description Factory default Sets all of the projector control items to the factory default setting except the following items. Lamp Corres. Value, PJ time, Filter time, PIN code lock and Logo PIN code lock. No show Sets the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 76
not provide the built-in battery. The date and time information are lost when the projector turns off (when "Eco" is set for the stand-by mode (Refer to p.74)), or the network configuration is reset. The timer function is disable until time is set up correctly. When using the NTP address - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 77
from the pull-down menu. Event Action ON Turns on the projector OFF Turns off the projector Lamp Auto Changes lamp mode to "Auto" Lamp High Changes lamp mode to "High" Lamp Normal Changes lamp mode to "Normal" Lamp Eco Changes lamp mode to "Eco" 4 Register an event Click Set button to - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 78
secondary events (event 4 and event 6) will become effective if a person turns off the projector (after event 3 and before event 4) or turns on the projector (after event 5 and before event 6). Invalid event Projector Power OFF ON OFF ON Invalid event OFF Event 1 Event 2 Event 3 Event 4 Event - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 79
the basic information of the projector status. Click Information on the main menu. Items Description Input Displays selected input and source. System Displays selected signal system. Signal Input signal status Screen Displays screen mode. Lamp status Displays lamp status with an animation - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 80
with X Red/Red with X Lamp failure (Lamp failure, check the lamp condition) Lamp failure (Lamp failure and lamp is being used over a specified use time, replace the lamp immediately) Items Description PJ time Displays the accumulated use time of the projector. Lamp Corres. Value Displays the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 81
can control and set up them together. Click Multi Control on the main menu to display the control page. Note: To control the multiple projectors, each projector must be set the same Network PIN code. Example of multi control PJ1 PJ2 PJ3 PJ4 PC6 PC5 PC4 Select Input2 for PJ1 to PJ4. 81 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 82
the multi control To start or stop controlling the multi-projectors, click Multi control setting menu and select ON or "PC adjustment", "Control", "Setting", "E-mail setting", "Timer", "SNMP setting" and "Network Viewer". Click each menu and perform setting and adjustment. ✐ The word "MULTI CONTROL" - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 83
used. * When you click on a listed IP address, the login page for the selected projector will be displayed with a new window. Status IP address Memo Page no. Click here to close the sub menu Check & Change. ✐ 1 0 projectors can be registered per page and up to 100 sets can be registered for - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 84
Control" and "Setting" cannot be operated. ✐ C annot register, delete or change the multi-control setting during using the network viewer function. ✐ It is recommended that a specified projector should be chosen for setting as a master when you use this multi- control function. The control for the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 85
setting and adjust controls of each menu. The setting value is applied to the registered projectors sequentially . ✐ This is effective only if the multi control item of the registered projector is set to either "Control & Image" or "Control". Setting all together "E-mail setting", "SNMP setting - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 86
times for the auto image display. After clicking Start button, the registered projectors start playing back the auto image display in sequential. ✐ F or further information of the Auto display, see "Using the network viewer function". (+p.124) ✐ This is effective only if the multi control item - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 87
8 Chapter 8. Network capture functions Network Capture is a function to display the screen image and reproduce the sound of the computer via the network. - Real Time Capture - Network Communication - Moderator Function - Playing Movie files 87 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 88
Capture 5 To start up the Network Capture 5, click "Network Capture 5" from "Start" - "All Programs" - "Network Viewer & Capture 5" menu. The application window will appear and search the projectors in the network and list them on the projector list. If any projector is not listed, check followings - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 89
on the computer. Terminate editing Terminates the editing window of the network communication. Terminate Play movie files Terminate the Play movie files. Parameter set up Sets the communication parameter between the computer and projector. For further information, see item "Parameter set up - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 90
Click Parameter set up button and setup the parameters on the Parameter setup window. Items Description Connection setting Capture port Sets the capture port no. on the projector. Default is 9000. Pincode Sets the Network PIN code on the projector. PJ search time Sets the time to search the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 91
the projector by using the web browser. From the Network menu supported for movie pictures. ✐ If you start capturing with the Select capturing object on the parameter set up window checked, the Select capturing object window below (right side) appears. Select the desired window title from the window - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 92
PC6 * Start capturing from the PC1. Select input mode to "Network" previously. 1 Start up Network Capture 5. 2 Select the projector(s) listed on the projector list on the application window and click Start real time capture. The application window will disappear and then the screen image of the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 93
image of PC1 with PJ2. PC6 * Star t capturing of the PC1 from the PC5. Select "Network" as input mode previously. 1 Access to the control page of the projector by using the web browser. From the Network menu, click Capture tab to display the setting page. 2 Select the computer number from the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 94
PC3 PC4 Capture PC5 * Star t captur ing of the PC1 from the projector PJ2. PJ2 PC6 Project a screen image of PC1 with PJ2. Select "Network" in the Input menu previously. 1 Select "Network capture" in the Network menu. Press Point 8 or SELECT button. 2 Select "PC number" and press SELECT - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 95
"Parameter set up" (+ p.90). ✐ When your computer provides multiple network adaptors, and "Select normal network adaptor" on the parameter setup window is un-checked, the network adaptor selecting window (+ p.26) will appear. ✐ When plural projectors are found, the real-time capture will not start - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 96
, control the page browsing and some other operations for the PC1. ✐ F or further instructions of the wireless mouse, please refer to the projector's owners manual. ✐ O n the projected screen using with the network capture, the shape of the mouse pointer differs from the one on the computer - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 97
that the item Auto search subject PC is "ON". If "OFF", change mode to "ON". * Projector can find up to 30 computers in the network. [2] When serving the capture data to the specific subject computers in the network. Set the item Auto search subject PC "OFF" described in the above and then display - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 98
capture functions Description of capture editing window Start Network Capture 5 and select the projector(s) on the projector list on the application window and click Communication Start button. The application window will disappear and the capture editing window will appear on the computer screen - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 99
Using the Network Communication Tool bar button names The following commands are To switch the tool bars displaying on or off, select each command from menu "Display"-"Tool bar". ✐ User can realign and join the tool bars (Standard, Shape, Color, Attribute), and change it to the floating pallet - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 100
up". (☞p.90) Join the communication (only for Sub PC) 1 Start Network Capture 5. The application window appears and lists the projector in the network. 2 Select a projector whose status on the projector list indicates "Communication starting", and click Start communication button. The application - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 101
How to use the Network communication Edit capture image Drawing figures 1 Click " :Pencil" button on When clicking " :Attribute" button on the standard tool bar, the following window will appear. This window appears only if the pencil or eraser tool is selected. Sets translucent color Line - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 102
Chapter 8 Network capture functions Drawing letter 1 Click " :Letter frame" button on the form tool bar. 2 Select a color of text with color tool bar. 3 Drag a mouse pointer on the screen image to specify the area of the letter frame. The letter input dialog window will appear. 4 E nter the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 103
x to b. , Ending the communication. ➔ The capture editing window disappears. R ➔ The capture editing window disappears. ✐ The projector projects the edited captured image on the screen when the input mode of the projector is set "Network". ✐ The command "Save Communication" can be executed in - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 104
of the communication is not stable. Click page 2 Communication Setting from the menu "Network"-"Capture". Execute command by clicking the button Free, Quit or Update. Displays IP all the users can acquire an authority Quit Quits the communication forcibly ➔ The capture editing window on all the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 105
and terms used in this chapter have following meanings. Moderator Client Network Capture 5 Moderator or teacher Participant of meetings or the classes The application which the moderator and client use Projector Moderator Network Capture 5 is installed on the moderator's computer. Clients - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 106
can be projected. Following application window appears when the Network Capture starts. After clicking Moderator registration button, the application window changes to "Moderator mode" window as shown in the lower picture below. Normal mode application window Projector list Status of use Moderator - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 107
the operating screen " (p.25) for other description of application window. Using the moderator function Moderator operation 1. A moderator starts up the Network Capture 5. On the application window, select a projector on the projector list to use and then click Moderator registration button. The - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 108
up the network Capture 5 and click Parameter set up button on the application window. On the moderator function setting item on the parameter set up window, set up "On Standby". When there are multiple projectors to unregister, the application window maintains "Moderator mode" until all the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 109
is set, the reserved port number is specified. ➔ Check the parameter setting (+p.90) PJ has not started Network Communication. Close the window and open it again. The projector might have turned off during the communication. ➔ Check the projector power and re-execute "Start communication". 109 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 110
more projectors, "Play movie files" button cannot be pressed. 2 Play movie files dialog will be displayed. When press "Select files" button, the files which are in the computer or connected --- will be displayed. Select the movie files and click "Open" button. ✐The kind of movie files supporting - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 111
or deleting files cannot be operated during playing a movie. Mute check box Review Stop Pause Forward Volume adjust slider 6 To end the play movie, the "Parameter set up" button. If set to "0", the projector will loop play the movie file lists endlessly. ✐When being checked in "Mute" - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 112
Chapter 8 Network capture functions 112 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 113
9. Network Viewer functions Network Viewer is a function to display the image data stored in the file servers by the projector through the network. Describes the file converter software File Converter 1, File Converter 2, the program creator software Program Editor, and how to use Network Viewer - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 114
of JPEG data. Some data may not be projected. Before using the images with the Network Viewer function, it should be converted to the optimized JPEG data for this projector. [1] How to use the Network Viewer 5 (File Converter 1) The File Converter 1 is a software to convert the images from the JPEG - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 115
Tool Button Convert each file Convert a folder Update Creating the available data 1 Select a folder in which the image files are stored by the explorer window. The preview images of the available image data (JPEG file, Bitmap file, power point file) in the selected folder are displayed on the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 116
you to select a local hard disk of your computer, shared computer in the network, and a directory of the FTP server. To change the conversion type or Power Point software will start running and converting automatically. Dialog window shown during using "Convert each file" and "Convert a folder - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 117
Specify a folder in the local hard disk or shared computer in the network FTP server Host name Enter host name or IP address of the FTP server Root Folder Specify the root directory of the FTP server. Normally use "/". User ID Enter your login account of the FTP sever. Password Enter your - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 118
. Creating the available data 1 Open a document with the individual software. 2 Select a "Print" sub menu and open the printing dialog. On the window, select "Network Viewer 5 (File Converter 2)" icon on "Select Printer" item and click Print button. ✐Set the option setting for the page layout or - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 119
programmed order with the projector . Procedure of making program 1 To start up the Program Editor, click "Network Viewer 5 (Program Editor)" menu from "Start" - "All Programs" - "Network Viewer & Capture 5" menu. 2 Click Connect button. 3 If the connection setting window appears, enter the each - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 120
Chapter 9 Network Viewer functions 4 Click New button. 5 Enter a program name and click Add button. 6 The folder selection window appears and select next page. ✐ The order of the display is listed in the folder list window. To change the order of the display, change the list order of the folder - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 121
the file name indicates the display order of the image. Display order number File name Menu File Edit View Sub menu Description Exit Closes index window UP Steps up the display order of the selected images DOWN Steps down the display order of the selected images Display time Sets up the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 122
Chapter 9 Network Viewer functions 3 To change the display order, select*1 files time*2, select*1 files and then click Display time button on the menu bar to display the Display time setting window. Check "Display time" in the check box and set the display time. To cancel the display time, un - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 123
Creating a program file [Program Editor] Example of the created program selection Use the web browser to access to the control page of the projector. Click "Viewer" of the Network menu on the web page, then connect to the FTP server and select the program name which was made at previous section. The - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 124
those folders as the program. *The network viewer function cannot be used when the network capture function is used. Condition to use the Network Viewer function: * Should be possible to use the FTP service with Windows 2000 Professional or XP Professional. * User has a full-access account to the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 125
have a specified directory in the server. /data/ User ID*1 Enter your login account of the FTP server preview images on the web browser. Using the network viewer function 3 Setup the setting page list window appears, select a program or folder and then click Set on the window. Displays - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 126
Chapter 9 Network Viewer functions After clicking Set, the file list or preview list of the selected folder or program is displayed on the window. Decides a image to start auto display with radio button Selects a page The original image is displayed on another window by clicking on the preview - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 127
displayed on the projector's screen. The web browser opens another window and displays the preview images on the Auto Control window sequentially. 2. display function above. ✐ The display time is greatly affected by the network environment or the operation of multi control, so the image may not - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 128
the multi-control. Click Error button to check the details. It may be displayed when the slave projector is using the Network Viewer or Capture function during the multi-control. Check which projector has an error , see item "Multi Control/Check & Change" (☞ pp.83-84). ✐When the file error - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 129
, automatic displaying stops and the manual displaying mode is set. When the right-click is pressed, automatic displaying restarts. ✐ The image data used for this function is the program or folder that the Network Viewer function used last time. The projector cannot specify particular images or - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 130
are displayed as follows. 2 Copy the data for projections in USB memory. Note: If the network PIN code is set for the projector, the authentication window appears as below. In this case, enter "user" in the user name and enter the network PIN code of the projector in the password. *Be sure to enter - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 131
Specify the root directory of the FTP server. Normally use "/". User ID If the network PIN code is set for the projector, enter "user". Password If the network PIN code is set for the projector, enter the network PIN code. Output folder...........Click Reference button and select the destination - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 132
Chapter 9 Network Viewer functions 132 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 133
10 Chapter 10. N etwork Projector [Windows Vista] This projector corresponds to "Connect to a network Projector" function that is the standard equipment for Windows Vista. 133 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 134
Chapter 10 Network Projector [Windows Vista] Use of "Connect to a Network Projector" This projector corresponds to "Connect to a Network Projector" *1 function that is the standard equipment for Windows Vista*2. You can project the computer screen via a network without any software by using this - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 135
Example 2) http://10.170.99.232 UNC Pass Example) ¥¥server¥projector¥pj_01 Enter the network address of the projector. Enter the network PIN code of the projector. 3 Click Connect button to connect to the projector. *1 Refer to the online help of Windows Vista for further details of "Connect to - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 136
Chapter 10 Network Projector [Windows Vista] 136 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 137
11 Chapter 11. Appendix Use of telnet Web browser setting Firewall setting Troubleshooting Terminology 137 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 138
> open_192.168.1.201_10000 [return] *U se the IP address assigned to the projector 3. When communication is established correctly, the word "PASSWORD:" appears on the window. Type the login password (Network PIN code*2) for the projector and then press "Enter" key on the keyboard. If you do not - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 139
The table below shows the typical command lists for controlling this projector and please consult your local dealer for further information of another instructions about the telnet application, please see the on-line guide on your computer. *2 The password is a Network PIN code decided item "Network - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 140
In(Shockwave Flash) is installed and set up correctly. please see further instructions on the next page and it is depending on the web browser. correctly. Especially when connecting the projector and computer with a UTP cross cable directly, or when the network does not provide the proxy server - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 141
setting Select Internet Options from Tools menu on the web browser and then select Security tab and click Customize Level... button. On the security setting window, scroll down and find the ActiveX controls and Plug-ins item, make sure that "Enable" is selected in item Run ActiveX controls and plug - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 142
and enter the proxy server address and port correctly in the proxy settings window. For further instruction please consult your network administrator. - Not using proxy server Uncheck the item Use a proxy server. If you connect the projector to the computer directly with UTP cross cable, it must be - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 143
Netscape Navigator v.7.0 JavaScript Setting Select Preference from Edit menu on the web browser and then select the item Advanced/ Scripts & Plugins in the Category column. Make sure that the Enable JavaScript for Navigator is checked. Flash Player enable Flash Player Plug-in setting Select About: - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 144
and port number correctly on HTTP Proxy item. For further instruction please consult your network administrator. - Not using proxy server Select the item Direct connection to the Internet in the proxy setting window. If you connect the projector to the computer directly with UTP cross cable, this - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 145
tab and check that the setting on the firewall setting window as follows; On (recommended) checked Don't allow exceptions unchecked 3 Select Exceptions tab and check the name of Network Capture 5 listed on the Programs and Services. If there is no program name, add the program by - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 146
properly? Wireless LAN Is the WIRELESS indicator on the side panel of the projector lighting? If there are not any problems, confirm the LAN setting again. If the computer supports Wireless LAN, activate the Network Capture 5 and try to connect with the Easy setting button. Refer to "5. Wireless - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 147
points may have the DHCP function. For detail of the settings, refer to the owner's manual for the devices or consult a system administrator of the network. Is the segment where the projector is installed different from the computer? Specify IP Address directly on the optional setting. Refer - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 148
. If the computer using the same channel as yours is existing closely, the networking speed may be reduced or the communication unstable. Change the channel to resolve the problem. The channels of the projector and projector Client computer must be the same. Or adjust the Quality selection in the - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 149
Audio tab on the property window and check that "PJ Virtual Audio Device" is selected on the Default device of Sound playback item. Network Viewer ■ Images from the file server don't appear on the screen? 1. Make sure that the input mode of the projector is "Network". 2. Check the account setting of - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 150
. ■ Sometime I have the incorrect images converted by the File Converter 2? Try to change the mode to "Disable" on "Document options" - "Print optimization" item on the "Network Viewer 5 (Driver) Advance Options" in the Network Viewer 5 (File Converter 2) Printer driver setting. 150 - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 151
, AutoCapture may not start automatically. Please make sure the examples as follows. Please consult your network administrator in detail. - When setup as follows in a computer with Windows Vista Click start button, and click [Control Panel] - [AutoPlay], and Take no action is selected in "Software - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 152
a Windows 2000 server and a dial-up router) on the network, the DHCP server function may be automatically operating. Ask your system administrator whether the DHCP server is operating. ESSID (Extended Service passed the Wi-Fi Alliance interoperability test are given the certification of 'Wi - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 153
Terminology Wi-Fi Alliance (Formerly Name: WECA (Wireless Ethernet Compatibility Alliance)) It is an organization that aims to promote the spread of Wireless LAN, and it guarantees the interoperability of products that meet the Wireless LAN standard. IEEE802.11b It is one of the wireless LAN - Sanyo WXU700 | Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 154
SO-WIN-KY7AC NETWORK OWNER'S MANUAL FOR WINDOWS SANYO Electric Co., Ltd.
Network Set-up and Operation
For Windows
Wired and Wireless Setting
Projector Set-up and Operation
Network Capture
Network Viewer
Moderator Function
Owner’s Manual
This is the manual for the Network function.
Read this manual thoroughly to operate the Network function.
First, read the owner's manual of the projector to understand the basic operation of the
projector and the safety instructions.
The safety instructions in the owner's manuals should be followed strictly.