Sanyo WXU700 Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 18
Install the software on computers., Select Wired LAN or Wireless LAN then connect
UPC - 086483074219
View all Sanyo WXU700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Chapter 2 Setup procedures To use the projector via the networks, follow the setup procedures below. STEP 1 Install the software on computers. Install the software recorded in CD-ROM on each computer which will be operated. Read following pages of this chapter to install. STEP 2 Select Wired LAN or Wireless LAN then connect the LAN and set the configuration. Decide depending on the LAN environment. Wired LAN Refer to "4. Wired LAN Configurations" (pp.27-34). Wireless LAN........ Refer to "5. Wireless LAN Configurations" (pp.35-44). Detailed LAN configurations need to be done with a browser later. First, complete the Wired or Wireless LAN connection between computers and projectors, then start browser configurations. ➔ "6. Basic setting and operation" (pp.45-64). STEP 3 Network Configuration has completed. Follow each chapter to project an image and operate the projector. ■ Operate and manage the projector ➔ "7. Controlling the projector" (pp.65-86) ➔ "Power Control and status check" (p.66) ➔ "Controls" (p.68) ➔ "PC adjustment" (p.72) ➔ "Setting up the projector" (p.73) ➔ "Timer setting"(p.76) ➔ "Projector information" (p.79) ➔ "Multi-control" (p.81) ■ Project an image on the computer ➔ "8. Network capture functions" (pp.87-110) ➔ "Use of real time capture" (p.91) ➔ "Use of network communication" (p.96) ➔ "Moderator function" (p.107) ■ Project an image on a network server ➔ "9. Network Viewer functions" (pp.113-130) ➔ "Create the available data" (p.114). ➔ "Create the program files" (p.119). ➔ "Project the image with network viewer function" (p.124) * Even if Network Capture 5 is not installed into the computer, the wireless LAN can be set up with USB memory. (p.95) 18