Sanyo WXU700 Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 85
Check & Change in the light mode, Controlling all together, Power & Status
UPC - 086483074219
View all Sanyo WXU700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Multi-control Check & Change page in the light mode Following functions in the "Check & Change" page are not available in the light mode. - Changing the control mode. - Deleting the registered IP address - Indicating the each status - Indicating the each memo Connection status Blinking: Connected Gray: Disconnected This indicates that the mode is "Image". This indicates that the mode is "Control". (Check & Change page in the light mode) Controlling all together "Power & Status", "PC adjustment", "Control" and "Setting" can be controlled all together. Set "ON" the multi control setting and adjust controls of each menu. The setting value is applied to the registered projectors sequentially . ✐ This is effective only if the multi control item of the registered projector is set to either "Control & Image" or "Control". Setting all together "E-mail setting", "SNMP setting" and "Timer" can be set all together. Set "ON" the multi control setting and items of each menu. The setting value is applied to the registered projectors sequentially. ✐ This is effective only if the multi control item of the registered projector is set to either "Control & Image" or "Control". 85