Sanyo WXU700 Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 63
Trap option setting
UPC - 086483074219
View all Sanyo WXU700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
SNMP setting Trap option Trap option setting Tick the check boxes in front of the condition item to send the trap. ✐ Click Set button if you tick or un-tick the check box on a page. [1 o When PJ lamp is off. o When PJ lamp replacement time is reached. o When internal PJ power circuit is failed. o When internal PJ temperature is too high. [2 o When PJ is turned into Standby in proper user operation. o When accumulated filter use time reaches [ ] hours. o When Power management function turns PJ lamp off. [3 o When the signal is interrupted. o When Auto Play is failed. o When lamp Corres. Value reaches [ ] hours. ✐ "When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned into standby with ON/ STANDBY button on the top control or the remote control. ✐ Up to 99,999 hours can be set for the time setting. ✐ If condition "When Auto Play is failed" is checked, the trap is sent when the error occurs during the auto display operation using with the network viewer function (+p.113). For further information of the error, refer to item "Auto Display setting and control page [3]"((+p.127). 63