Sanyo WXU700 Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 94
] Control by the projector, Select Network capture in the Network menu. Press Point
UPC - 086483074219
View all Sanyo WXU700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Chapter 8 Network capture functions [3] Control by the projector * PC provides the Network Capture. PC1 PC2 PJ1 PC3 PC4 Capture PC5 * Star t captur ing of the PC1 from the projector PJ2. PJ2 PC6 Project a screen image of PC1 with PJ2. Select "Network" in the Input menu previously. 1 Select "Network capture" in the Network menu. Press Point 8 or SELECT button. 2 Select "PC number" and press SELECT button and using Point ed buttons to select the PC number to connect, and then press SELECT button. 3 Select "Connected" and then press SELECT button to start capturing. The screen image of the selected computer will appear on the projected screen in real time. 4 To end capturing, select "Disconnect" and then press SELECT button. Set "On" when using the wireless mouse function ✐ The IP address of the connecting PC should be registered previously (☞ p.91). ✐ If the error message appears, check item "Parameter set up" (+ p.90). ✐The projector does not provide the function to register the IP address of the computer and to set the parameter of the capturing. They should be registered by using the web browser previously (☞ p.91). ✐The remote control which is provided with the projector does not have the mouse operating function. 94