Sanyo WXU700 Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 74

Chapter 7 Controlling the projector Item Description Language Sets the language display of projector's on-screen display menu. Auto setup Executes the Auto PC Adj, and Input Search function below according to the each setting after clicking Start button. Auto PC adj.........Sets Auto PC Adjustment mode. Input search........Sets the auto-input signal detection mode. Auto keystone....Sets Auto Keystone mode. Background Sets the screen background when no signal input. Item Description Display Switches on or off the on-screen menu display on the screen. Countdown off..... Displays image during the starting up. Logo Sets the logo display on the screen during the startup. Ceiling Sets the image top/bottom and left/right reversed. Rear Sets the image left/right reversed. HDMI setup Sets the input signal form of HDMI input. Image Sets the Digital R/G/B image level of HDMI. Sound Sets the audio input when using HDMI. Item Description Terminal Sets the terminal of "COMPUTER IN 2/MONITOR OUT". Pointer Sets the pointer form. Picture in Picture....Sets the Picture in Picture mode and set the sub picture size and position. Mode Sets the Picture in Picture mode. Subpicture size...Sets the sub picture size. Subpicture position...Sets the sub picture position. Item Description Power management...........Sets into the selected power management mode if the input signal is interrupted and no control key is pressed for the specified period of time. *The specified time can be set 1 to 30 min. On start Sets the power-on mode when the AC cord is connected to the outlet. Standby mode........Sets the network function enable or disable in the standby mode. Normal..... Enable Eco Disable Lamp control...........Selects the lamp control mode. Remote control...........Sets the remote control code. 74