Sanyo WXU700 Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 127
Auto Display setting and control Start, <<], Error
UPC - 086483074219
View all Sanyo WXU700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
4 Auto Display setting and control page [3] Using the network viewer function Display time*1 of the image (3 to 240 sec.) Repeat times (0 to 255 times) * 0 means endless play Click here to check the further information of the file error Error info. ✐ The preview image will not appear when the option is set "Display OFF".(+p.121) 1. Click Start button to start the auto-display. The image in the selected folder or program is displayed on the projector's screen. The web browser opens another window and displays the preview images on the Auto Control window sequentially. 2. Click Stop button to stop the auto-display. • Restart the auto-display, click Restart button. * When the auto-display stops, it enables you to display the images manually by using [] button. 3. Click End button to end the auto-display. • When the Error button is pressed, the further information of the file error is displayed. For further error information, refer to the next page. *1 When the program file for auto-display is selected, the display time of each image gives preference to the setting specified by the program file over the setting specified by the auto-display function above. The images for which the display time is not set shows the display time specified by the auto-display function above. ✐ The display time is greatly affected by the network environment or the operation of multi control, so the image may not be displayed as the specified display time. ✐ The timing to switch images is not the same on the screen and on the web browser. 127