Sanyo WXU700 Instruction Manual, PLC-WXU700 Network Set Up Windows - Page 37
Confirming the Operation p.30., To confirm whether the settings are correct
UPC - 086483074219
View all Sanyo WXU700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Setting the network environment 5. After completing all the settings, select "Set" and press SELECT button. Now, all procedures have been done. To cancel the adjusted settings, select the "Cancel" and press SELECT button. To confirm whether the settings are correct, follow the procedures in "4. Wired LAN configurations" ➔ "Confirming the Operation" (p.30). Network setting DHCP: On DHCP: Off For configuring of WEP, WPA-PSK, WPA2-PSK security, select "Next". Refer to "Configuring security with the projector" on next page for details. Item Description DHCP Sets DHCP function On or Off. When you setup the network setting manually, select "Off". When its set On, IP address, Subnet, Gateway and DNS are automatically set according to your network environment *1. IP address Sets IP address of the projector Subnet Sets Subnet mask. Normally sets 255.255.255.0 Gateway*2 Sets IP address of the default gateway (Router) DNS*3 Sets IP address of the DNS server. Must be set when the E-mail function is used. Network type...........Sets Infrastructure or AdHoc mode. When the "AdHoc" is selected, the security "WPA-PSK" and "WPA2-PSK" are not available. SSID/ESSID Identifier of the wireless access point. *1 Set "On" only when the DHCP server is available on your network environment. *2 Set [255.255.255.255] if the network does not provide the gateway (router). *3 Set [255.255.255.255] if you do not use the function E-mail alert. * While the network communication function (p.96) or moderator function (p.105) is to be executing, the menus "Network capture", "Network viewer" and "Memory viewer" are displayed in gray. 37