Sanyo WXU700 Instruction Manual, PLC-WXU700A

Sanyo WXU700 - WXGA LCD Projector Manual

Sanyo WXU700 manual content summary:

  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 1
    Multimedia Projector MODEL PLC-WXU700A Network Supported □ Wireless LAN IEEE802.11b/g/n □ Wired LAN 100-Base-TX/10-Base-T Memory Viewer □ USB Memory Viewer * Refer to the owner's manuals below for details about network and memory viewer function. ■ Network Set-up and Operation ■ Memory viewer
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 2
    function reduces power consumption and maintains the lamp life (p.56). memory to a computer. For details, refer to the owner's manual of "Network Set-up and Operation." ♦ Quick Termination ♦ Memory Viewer Function Insert the dedicated USB memory into the projector The AC power cord can be
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 3
    66 Cleaning the Projection Lens 66 Cleaning the Projector Cabinet 66 Lamp Replacement 67 Resetting the Lamp Counter 68 Appendix 69 Troubleshooting 69 Menu Tree 73 Indicators and Projector Condition 75 Compatible Computer Specifications 76 List of Picture in Picture 78 Technical
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 4
    this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 5
    service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following the operating instructions
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 6
    it is not designed to protect an appliance from external forces. Do not transport the projector by courier or any other transport service with this case, otherwise the projector can be damaged. When handling the projector, do not drop, bump, subject it to strong forces, or put other things on the
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 7
    Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture upward, downward or backward, perpendicular to the
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 8
    instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number : PLC-WXU700A Trade Name : Sanyo Responsible party : SANYO from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 9
    ⑤ Zoom Lever ⑥ Lens Cap CAUTION Do not turn on a projector with lens cap attached. High temperature from light beam may damage lens Lamp Cover ⑰ Filters ⑱ Adjustable Feet Note: ② WIRELESS Indicator and ⑮ LAN Connection Terminal are for the Network function. Refer to the owner's manual of "Network
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 10
    USB cable (not supplied) (p.17). ③ CONTROL PORT When controlling the projector with RS-232C, connect the control equipment to this connector with the the owner's manual of "Network Set-up and Operation"). ⑧ USB Connector (Series A) Connect the USB menory (refer to the owner's manual "Network Set-up
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 11
    Memory Viewer menu. Refer to the owner's manual of "Memory Viewer function". ⑤ POWER indicator -Lights red when the projector is in stand-by mode. - button Turn the projector on or off (pp.21-23). ⑩ LAMP REPLACE indicator Lights yellow when the projection lamp reaches its end of life (pp.67, 75). 11
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 12
    To use these buttons, connect the projector and your computer with a USB cable. (pp.10, 17) ⑮ LAMP button Select a lamp mode. (pp.28, 58) owner's manual of "Memory viewer function". ㉘ NETWORK button Select the Network input. See the owner's manual of "Network Set-up and Operation" and owner's manual
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 13
    is replaced by an incorrect type. ● Dispose of used batteries according to the instructions or your local disposal rule or guidelines. Remote Control Operating Range Point the remote control toward the projector when pressing the buttons. Maximum operating range for the remote control is about 16
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 14
    , otherwise eye damage may result. The caution label is put on the remote control. Signal Emission Indicator Laser Light Window Pointer Function You can move the Spotlight or Pointer of the projector with the remote control to emなphいas。ize a part of the projected image. 1 Press and hold the MENU
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 15
    feet lock latches on both side of the projector. Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to a proper height and tilt. Keystone distortion can be adjusted automatically with the Auto setup function or manually by using the remote control or the menu
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 16
    Installation Positioning the Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. Note: • The brightness in the room has a great influence on picture quality. It is recommended
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 17
    when using the COMPUTER IN 1/ COMPONENT IN and the COMPUTER IN 2/MONITOR OUT terminal as input. • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • USB cable connection is needed when operating the computer with the remote control or using the PAGE ▲▼ buttons on
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 18
    Equipment Cables used for connection • Video and Audio cable (RCA x 3) • S-video cable • Audio cable (Cables are not supplied with the projector. ) External Audio Equipment Video and Audio Output (Video) (L) (R) Audio Input S-video Output Video and Audio cable Audio cable (stereo) S-video
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 19
    used for connection • Audio cables • Scart-VGA cable • Component cable • HDMI cable • Component-VGA cable (Cables are not supplied with this projector.) Installation RGB Scart 21pin Output Component Video Output (Y, Pb/Cb, Pr/Cr) Audio Output HDMI Output Component cable Scart-VGA cable
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 20
    system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning the projector on. CAUTION The AC outlet must be near this equipment and must be easily accessible. Note: Unplug the
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 21
    and press the SELECT button. And then follow the input signal guidance window to correct the signal and connection. If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on the next page. 16 The preparation display will disappear after
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 22
    start to operate the projector. If you entered an projector. Setting a PIN code prevents unauthorized use of the projector projector with your PIN code. PIN Code Input Dialog Box After the OK icon disappears, you can operate the projector your PIN code, the projector can no longer be started.
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 23
    ON, WAIT AT LEAST FIVE MINUTES BEFORE TURNING IT OFF. DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN HOUR IN EVERY 24 HOURS. Note: • When the On start function is set to On, the
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 24
    Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. 1 Press the MENU button on the top control or the remote control to display the On
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 25
    Display the input source information: Input , H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter, Power management, Key lock, PIN code lock and Remote control (p.63).  Network See the owner's manual of "Network Set-up and Operation".  Guide The key operation is displayed. 25
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 26
    after pressing the AUTO SETUP/CANCEL button on the top control or the AUTO SET/CANCEL button on the remote control, correct the image manually as follows: Press the KEYSTONE button on the remote control. The Keystone dialog box appears. Use the Point ▲▼ buttons to correct keystone distortion. The
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 27
    Basic Operation Sound Adjustment Direct Operation Volume Press the VOLUME+/- buttons on the top control or on the remote control to adjust the volume. The volume dialog box appears on the screen for a few seconds. Mute Press the MUTE button on the remote control to select On to temporarily turn off
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 28
    , 40-41 for details. Refer to the owner's manual of "Network Set-up and Operation" for details about the network input. FREEZE button Press the FREEZE button on brightness Eco Lower brightness reduces the lamp power consumption and extends the lamp life. LAMP button PIP button Note: See the
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 29
    the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as User in the Logo selection (see page 50), the screen changes each time you press the NO SHOW button as follows. black out → the captured image
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 30
    Menu operation as described below. Top Control INPUT button Computer 1 Remote Control COMPUTER button Computer 2  Computer 1 HDMI Video Computer 2  S-video Network  COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output. Input Menu Menu
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 31
    Menu operation as described below. Top Control INPUT button Computer 1 Remote Control COMPUTER button Computer 2  Computer 1 HDMI Video Computer 2  S-video Network  COMPUTER 2 can not be selected when using the COMPUTER IN 2/ MONITOR OUT terminal as MONITOR OUT output. Menu Operation
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 32
    is required (pp.34-35). There is no signal input from the computer. Check the connection between your computer and the projector. (See "Troubleshooting" on pp.69-72.) The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1-5 (pp.34-35). PC Systems
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 33
    The adjusted parameters from the Auto PC adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.34-35). • The Auto PC adjustment
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 34
    enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen Menu. Use the
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 35
    be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the PC System Menu (p.32). • When input computer signal to the projector, PC adjust will become available. Press MENU button to close this dialog box. Press SELECT button to store adjusted data. 35
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 36
    pictures in a bright room. Standard Normal picture mode preset on the projector. Real Picture mode with improved halftone for graphics. Blackboard (Green) wall color from the preset four colors. Image 1-4 For viewing with the user preset image mode in the Image adjust Menu (see pages 37-38). This
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 37
    mode Use the Point ◄► buttons to adjust the setting value. Note: • When White balance Red, Green or Blue is adjusted, Color temp. will change to User. • When Blackboard(Green) or Colorboard is selected in Image select, Color temp. will change to Blackboard or Colorboard. 37
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 38
    then select Yes. Stored data can be called up by selecting an Image (1-4) in the Image Mode Selection on page 36. Screen Size Adjustment This projector has the picture screen resize function, which enables you to customize the image size. 1 Press the MENU button to display the On-Screen Menu. Use
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 39
    Computer Input Custom Adjust the screen scale and position manually with this function. Press the Point ►button at Custom and the Custom is displayed on the screen, you can use the Point ▲▼ buttons to choose
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 40
    VIDEO jack, select Video. S-video When video input signal is connected to the SVIDEO jack, select S-video. Video Note: • Network is for the Network function. See the owner's manual of "Network Set-up and Operation" . • When the Input Search function is set to On1 or On2 in the Auto setup function
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 41
    a ScartVGA Cable, select RGB (Scart). HDMI When the video signal is connected to the HDMI terminal, select HDMI. Note: • Network is for the Network function. See the owner's manual of "Network Set-up and Operation" . • When the Input Search function is set to On1 or On2, the input signal will be
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 42
    itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M and PAL-N. AV System
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 43
    pictures in a bright room. Standard Normal picture mode preset on the projector. Cinema Picture mode adjusted with fine tone. Blackboard (Green) For the wall color from the preset four colors. Image 1-4 For viewing with the user preset image mode in the Image adjust Menu (see pages 44-45). This
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 44
    the Point ◄► buttons to adjust the setting value. Note: • When White balance Red, Green or Blue is adjusted, the Color temp. level will change to User. • Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p.42). • When Blackboard(Green) or Colorboard is selected in Image
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 45
    options. Off.......... Disabled. L1........... For an active picture. L2........... For a still picture. Film........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the Point
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 46
    Video Input Screen Size Adjustment This projector has the picture screen resize function, which ratio) by stretching the image to make it look natural. Custom Adjust the screen scale and position manually with this function. Press the Point ► button at Custom and the Custom is displayed on the
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 47
    Setting Setting This projector has a Setting menu that allows you to set up the other various functions described below. 1 Press the MENU button to display the On-Screen Menu.
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 48
    and corrects keystone distortion according to the projector's tilt. Manual . . Works only when pressing the Lamp are displayed every time the signal is switched. •Only the last selected input source can be detected. •If the INPUT button on the top control or the HDMI, COMPUTER, VIDEO or NETWORK
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 49
    to switch between each option. Blue . . . Blue colored background. User . . The image you captured. Black . . Black colored background. HDMI when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 50
    PIN code change cannot be selected. Logo select Logo select This function decides on the starting-up display from among following options. User......... Show the image you captured. Default..... Show the factory-set logo. Off Show the countdown display only. HDMI setup Terminal Pointer Standby
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 51
    function and set it to User. Then the captured image will be displayed the next time you turn on the projector or when you press the NO by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction. • When Logo PIN code lock
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 52
    -digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector. If you entered an incorrect Logo PIN code, Logo PIN code and the number will turn red for a moment. Enter the correct Logo PIN code
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 53
    . This function is used to project the image from a ceiling-mounted projector. Ceiling Rear When this function is set to On, the picture will Digital R/G/B vary from equipment to equipment. For details, refer to the owner's manual of your Digital R/G/B equipment. When the black parts of the image
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 54
    Select Eco when you do not use the projector via network. The projector's network function will stop when turning off the projector. Refer to the owner's manual of "Network Set-up and Operation". Note: • Factory default is Network. • When selecting Network, the cooling fans may be running depending
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 55
    screen within the main screen. (Picture in Picture combinations provided in this projector are shown on pages 78.) Only the sound on the main picture is button on the top control or pressing the COMPUTER、VIDEO、HDMI or NETWORK button on the remote control or through Input Menu operation. Operation of
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 56
    For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Power management Select one of the following options: Ready When the lamp has been fully cooled down, the POWER
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 57
    turned on just by connecting the AC power cord to a wall outlet. Note: Be sure to turn off the projector properly (see "Turning Off the Projector" on page 23). If the projector is turned off in the incorrect sequence, the On start function does not work properly. Closed caption Closed caption is
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 58
    Brighter than the Normal mode. Normal....... Normal brightness Eco Lower brightness reduces the lamp power consumption and extends the lamp life. Note: Lamp mode cannot be changed for a while after turning on the projector. Lamp needs some time to stabilize after the power is turned on. Stored
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 59
    or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center. PIN code lock This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security. Off Unlocked
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 60
    -digit number. After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can start to operate the projector. If you entered an incorrect PIN code, PIN code and the number will turn red for a moment. Enter the correct PIN code all over again
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 61
    On 3....Be sure to set the Lamp control in High and the Fan control in On 3 when using the projector inclined at between +40 degrees to Lamp counter This function is used to display the cumulative lamp operating time and reset the lamp counter. When the lamp life is left 0 hour, the Lamp replacement
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 62
    the use environment. Factory default Warning log This function records anomalous operations while the projector is in operation and use it when diagnosing faults. Up to 10 warning returns all setting values except for the User logo, PIN code lock, Logo PIN code lock and Filter counter to the
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 63
    of the image signal being projected and the operation of the projector. Direct Operation Press the INFO. button on the remote control The selected language is displayed. Lamp status The selected lamp mode is displayed. Lamp counter The cumulative lamp operating time is displayed. Power management
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 64
    cannot be turned on and the WARNING indicator still lights red, unplug the AC power cord and contact the service station. Top Control CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. 64 WARNING emit
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 65
    result in internal heat buildup and adversely affect the life of the projector. If a Filter warning icon appears on the LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 66
    a knot in the string to secure it in place. 2 To pass the other end of the string into the hole on the top of the projector and pull at it. Cleaning the Projection Lens Unplug the AC power cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 67
    Handle Screw Screw Lamp ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector ● Replacement Lamp Type No. : PLC-WXU700A : POA-LMP111 (Service Parts No. 610
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 68
    a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion. ● A Lamp may explode as a result of vibration
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 69
    Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. -Make sure you have properly connected the projector to peripheral equipment as described on pages 17-19. -Make sure all equipment is connected to AC outlet and the power is
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 70
    signal is correctly output from your computer. Some laptop computers may need to change the setting for monitor output when connecting to a projector. See your computer's instruction manual for the setting. - It takes about 30 seconds to display an image after turning on the
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 71
    remote control can not be used as a wireless mouse. - Turn on the projector before turning on the computer. The exclamation mark appears on the screen. Top where you purchased the projector or the service loc k, Security key loc k or Security center. PIN code lock. 71
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 72
    Appendix WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 73
    Input/Video Input Input Input Computer 1 Computer 2 HDMI Video S-video Network RGB Component RGB (Scart) RGB Sound Sound Volume Mute 0-63 On/ temp. Red Green Blue Sharpness Gamma Reset Store Normal 0-63 0-63 XLow Low Mid High User 0-63 0-63 0-63 0-15 0-15 Yes/No Image 1 Image 2 Image 3 Image
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 74
    PC adj. On/Off Auto Keystone Auto Manual Off Store/Reset Blue/User/Black On/Countdown off/Off Logo select User Default Off Capture Yes/No Logo PIN code lock Off Projector Remote control PIN code lock Off/On1/On2 PIN code change L1/L2 Offl/On1/On2/On3 Lamp counter Lamp counter Lamp counter reset
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 75
    the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. • • • green • • • red • • • off • • • blinks green • • • blinks red When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 76
    Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock for analog signal and 110
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 77
    .94 (Interlace) 59.94 60.00 50.00 59.95 Note: • The specifications are subject to change without notice. • Depending on your PC settings, the digital settings. • When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC. Be sure to
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 78
    Appendix List of Picture in Picture o : Picture in Picture combinations are enabled - : Picture in Picture combinations are disabled Note: • When the input signal(s) is/are incompatible, X mark will be displayed on the Main/Sub picture. • Depending on the frequency or signal type of PC/AV input,
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 79
    Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 13.16" x 3.09" x 10.14" (334.2 x 78.4 x 257.5mm) (Not including protrusions) Net Weight 7.94 lbs (3.6 kg) Feet Adjustment 0˚ to 8.9˚ Panel Resolution LCD Panel
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 80
    Quick Reference Guide Safety Manual AC Power Cord Remote Control and Batteries VGA Cable Lens Cap with String PIN Code Label Network Application (CD-ROM) Soft Carrying Case USB thumb drive for Auto Capture Case (for USB thumb drive) Hook and Loop Fastener ● The specifications are subject
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 81
    Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see page 51 on the owner's manual of "Network Set-up and Operation." Projector Input Computer 2 (Analog) HDMI
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 82
    Appendix Configurations of Terminals COMPUTER IN 1 /COMPONENT IN /MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) 54 32 1 10 9 8 7 6 15 14 13 12 11 1 Red (R/Cr) Input/Output 2 Green (G/Y) Input/Output 3 Blue (B/Cb) Input/Output 4 ----- 5 Ground (Horiz.sync.) 6 Ground (Red)
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 83
    Code Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 84
    10.14 (257.5) 2.14(53.8) Appendix Dimensions 13.16(334.2) 3.17(80.5) 3.09(78.4) 3.66(93.0) 2.78(70.5) Unit: inch (mm) Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.472) 5.08(129.0) 5.20(132.0) 5.08(129.0) 4.43(112.5) 5.51(140.0) 84
  • Sanyo WXU700 | Instruction Manual, PLC-WXU700A - Page 85
    KY7AE
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85

Multimedia Projector
MODEL
PLC-WXU700A
Owner’s Manual
Network Supported
□ Wireless LAN
IEEE802.11b/g/n
□ Wired LAN
100-Base-TX/10-Base-T
Memory Viewer
USB Memory Viewer
*
Refer to the owner’s manuals below for
details about network and memory viewer
function.
Network Set-up and Operation
Memory viewer function