Sanyo WXU700 Instruction Manual, PLC-WXU700A - Page 77
ON-SCREEN, DISPLAY, RESOLUTION, H-Freq., image is not projected correctly, restart your PC.
UPC - 086483074219
View all Sanyo WXU700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Appendix When the input signal is digital from HDMI terminal, refer to the chart below. ON-SCREEN DISPLAY D-480p D-480p D-480p D-575p D-575p D-720p D-720p D-720p D-VGA D-VGA D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 D-WXGA 7 D-WXGA 8 D-WXGA 9 D-WXGA 10 D-WXGA 11 D-WXGA 12 RESOLUTION 640 x 480 720 x 480 720 x 480 720 x 575 768 x 575 1280 x 720 1280 x 720 1280 x 720 640 x 480 640 x 480 800 x 600 1024 x 768 1366 x 768 1360 x 768 1376 x 768 1360 x 768 1366 x 768 1280 x 768 1280 x 768 1280 x 768 1280 x 800 1280 x 800 1280 x 800 1280 x 800 H-Freq. (KHz) 31.47 ---------31.25 37.50 ---45.00 31.47 ---37.879 43.363 48.36 47.7 48.36 56.160 46.500 47.776 60.289 68.633 49.572 41.200 49.702 63.98 V-Freq. (Hz) 59.88 59.94 60.00 50.00 50.00 50.00 59.94 60.00 59.94 60.00 60.32 60.00 60.00 60.00 60.00 72.000 50.000 59.870 74.893 84.837 59.870 50.000 59.810 60.02 ON-SCREEN DISPLAY D-SXGA1 D-SXGA2 D-SXGA3 D-SXGA+ 1 D-SXGA+ 2 D-SXGA+ 3 D-WSXGA +1 D-UXGA D-WXGA +1 D-1035i D-1080i D-1080i D-1080i D-1080p D-1080p D-1080p D-WUXGA 2 RESOLUTION 1280 x 1024 1280 x 1024 1280 x 1024 1400 x 1050 1400 x 1050 1400 x 1050 1680 x 1050 1600 x 1200 1440 x 900 1920 x 1035 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1200 H-Freq. (KHz) 63.98 60.276 31.65 63.97 65.350 65.120 65.290 75.000 55.935 33.75 33.75 28.125 ------------74.038 V-Freq. (Hz) 60.02 58.069 29.80 60.19 60.120 59.900 59.954 60.000 59.887 60.00 (Interlace) 60.00 (Interlace) 50.00 (Interlace) 59.94 (Interlace) 59.94 60.00 50.00 59.95 Note: • The specifications are subject to change without notice. • Depending on your PC settings, the digital signals of your PC may not be projected correctly. In such a case, confirm your PC settings. • When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC. Be sure to follow this procedure, otherwise an image may not be projected on the screen. If an image is not projected correctly, restart your PC. • Do not disconnect the cable while the projector is running. If the cable has been disconnected and then reconnected, an image may not be correctly projected. 77