Sanyo WXU700 Instruction Manual, PLC-WXU700A - Page 28

Basic Operation Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. HDMI/COMPUTER/VIDEO/NETWORK button Press the HDMI, COMPUTER, VIDEO or NETWORK button on the remote control to select the input source. See pages 30-31, 40-41 for details. Refer to the owner's manual of "Network Set-up and Operation" for details about the network input. FREEZE button Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the Freeze function, press the FREEZE button again or press any other button. Fig.1 will appear on the Screen menu while the Freeze function is working. Fig.1 Remote Control HDMI button COMPUTER button INFO. button D.ZOOM+/buttons VIDEO button NETWORK button POINT ▲▼buttons FREEZE button INFO. button Display the input source information: Input, H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter, Power management, Key lock, PIN code lock and Remote control (p.63). D.ZOOM +/- buttons Press the D.ZOOM +/- buttons on the remote control to enter to the Digital zoom +/- mode. See page 39 for details. LAMP button Press the LAMP CONTROL button on the remote control to select the lamp mode for changing the brightness on the screen. Auto........... The brightness according to the input signal (between High and Eco mode). High........... Brighter than the Normal mode. Normal....... Normal brightness Eco Lower brightness reduces the lamp power consumption and extends the lamp life. LAMP button PIP button Note: See the next page for the description of other buttons. PIP button Press the PIP button on the remote control to enter P in P or P by P. Mode of Picture in Picture and input source will be displayed on the main picture and input source will be displayed on the sub picture for 10 seconds. See page 55 for details. 28