Seagate ST15150N Product Manual - Page 86
drive end of the cable. If you accidentally plug the I/O connector
View all Seagate ST15150N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
76 ST15150N/ND/W/WD/WC/DC Product Manual, Rev. D Table 14. Single-ended cable pin assignments (non-shielded connector) for ST15150N drives Signal Pin number Signal Pin number −DB (0) 2 GROUND 28 −DB (1) −DB (2) −DB (3) −DB (4) −DB (5) 4 GROUND 30 6 −ATN 32 8 GROUND 34 10 −BSY 36 12 −ACK 38 −DB (6) 14 −RST 40 −DB (7) 16 −MSG 42 −DB (P) 18 −SEL 44 GROUND 20 −C/D 46 GROUND 22 −REQ 48 GROUND 24 −IO 50 TERMPWR 26 Notes: 1. All odd pins except pin 25 are connected to ground. Pin 25 is left open. Caution. Pin 25 must not be connected to ground at the host end or the drive end of the cable. If you accidentally plug the I/O connector in upside down, terminator power on pin 26 will be shorted to ground. 2. The minus sign preceding a signal name indicates that signal is active low.