Sharp CD-ES9 Service Manual - Page 88
IC851 VHiAN80T53/-1: Multi Regulator AN80T53, Pin No., Terminal Name, Function, BLOCK
View all Sharp CD-ES9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
IC851 VHiAN80T53/-1: Multi Regulator (AN80T53) Pin No. 1 2 3 4 5 6 7 Terminal Name REG4 Output REG3 Output VCC GND MODE 1 REG2 Output REG1 Output Function 5.1 V power supply with a minimum peak out current of 1200 mA. 13 V power supply with a minimum peak out current of 1350 mA. Connected to Power supplies. Connected to the IC substrate. REG1, REG2, REG3 and REG4 outputs are turned ON when this pin is 5 V. 10 V power supply with a minimum peak out current of 800 mA. 8.5 V power supply with a minimum peak out current of 700 mA. Peak Current Protection, Thermal Protection, Load Short Protection. Out puts CD-ES900/CD-ES99 + - Prc Drive + - Prc Drive + - Prc Drive + - Prc Drive 5 MODE1 Reference Voltage 23 REG3 VCC 13 V 4 GND 1 REG4 5.1 V 7 REG1 8.5 V Figure 8-9 BLOCK DIAGRAM OF IC 6 REG2 10.0 V 8 - 9