Sharp CV-P10MX CV-P09LX , CV-P10LC , CV-P10MX , CV-P12LX Operation Manual - Page 20
Pre-operation Checks - replacement remote
UPC - 074000662278
View all Sharp CV-P10MX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
PRE-OPERATION CHECKS POWER PLUG CHECK This air conditioner uses a fused power plug. Always check the power plug before use. 1 Press the RESET button. 2 Insert the power plug into the wall socket. 3 Press the TEST button. You will hear a CLICK if the circuit breaker is functioning correctly. 4 Press the RESET button until you hear another CLICK. The circuit breaker is activated, power is supplied, and the air conditioner is now ready for use. RESET TEST Do not attempt to use the air conditioner if the above procedure is impossible, as it is malfunctioning. Disconnect the power plug and request service. LOADING BATTERIES Use two AAA (R03) batteries. 1 Remove the battery cover at the back of the remote control. 2 Insert batteries into the compartment, making sure the ± and - polarities are correctly aligned. • Lines will appear on the display when batteries are properly installed. 3 Reattach the battery cover. 4 Press the RESET button using a thin pointed implement. Battery cover NOTES: • The battery should last approximately one year under normal use. • When replacing the batteries, always change both batteries at the same time, and make sure they are the same type. • If the remote control does not operate normally after replacing the batteries, press the RESET button using a thin pointed implement. • If you will not be using the unit for a prolonged period, remove the batteries from the remote control. E-18