Sharp CV-P10MX CV-P09LX , CV-P10LC , CV-P10MX , CV-P12LX Operation Manual - Page 29

ENGLISH ON TIMER The unit will turn on automatically according to your setting. Timer duration can be set from a minimum of half an hour (30 minutes) to a maximum of 12 hours. Up to 9.5 hours, you can set in half-hour (30-minute) increments and from 10 to 12 hours, in 1-hour increments. Point the remote control at the signal receiver window on the unit. 1 Press the ON TIMER button. • The time setting will change as you press the button as follows. 0.5h 1.0h 1.5h 10h 11h 12h 1 Display shown when you set the unit to turn on 6.5 hours later. Hold the button down to speed through the settings. • The orange TIMER lamp on the unit will light. • The unit will emit a beep when it receives the signal. • The time setting will count down to show the re- maining time. Select the mode, temperature, fan speed setting and PLASMACLUSTER operation as desired. • When the temperature is set with the ON TIMER, the temperature will show in the display for 5 seconds and then return to the time display. • If you do not change the setting, the unit will operate using the most recent setting. TO CANCEL TIMER Press the CANCEL button. • The orange TIMER lamp on the unit will turn off. E-27