Sharp CV-P10MX CV-P09LX , CV-P10LC , CV-P10MX , CV-P12LX Operation Manual - Page 22
Cool Mode - exhaust hose
UPC - 074000662278
View all Sharp CV-P10MX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
COOL MODE 1 Install the exhaust hose (See Page16), turn the drainage nozzle to the CLOSE position, Drainage nozzle and check the drainage nozzle is covered "CLOSE" position with the stopcock. Stopcock 1 Press the MODE button to select COOL mode. COOL DEHUM FAN VENT 32 Press the POWER button to start operation. • The red OPERATION lamp on the unit will light. 2 3 Press the TEMPERATURE button to set the desired temperature. • The temperature can be set within the range 3 of 64°F to 86°F. 1 4 4 Press the FAN button to set the de- sired fan speed. AUTO QUIET LOW HIGH TO TURN OFF Press the POWER button again. • The red OPERATION lamp on the unit will turn off. E-20
1
3
COOL MODE
Drainage nozzle
Stopcock
E-20
Install the exhaust hose (See Page16), turn
the drainage nozzle to the CLOSE position,
and check the drainage nozzle is covered
with the stopcock.
1
Press the MODE button to select COOL
mode.
COOL
DEHUM
FAN
VENT
2
Press the POWER button to start op-
eration.
• The red OPERATION lamp
on the unit will
light.
3
Press the TEMPERATURE button to set
the desired temperature.
•
The temperature can be set within the range
of 64°F to 86°F.
4
Press the FAN button to set the de-
sired fan speed.
AUTO
QUIET
LOW
HIGH
TO TURN OFF
Press the POWER button again.
•
The red OPERATION lamp on the unit will turn
off.
1
4
2
3
"CLOSE" position