Sharp CV10NH CV-10NH Operation Manual - Page 26

TIMER OPERATION OFF TIMER The unit will turn off automatically according to your setting. Timer duration can be set from a minimum of half an hour (30 minutes) to a maximum of 12 hours. Up to 9.5 hours, you can set in half-hour (30-minutes) increments and from 10 to 12 hours, in 1-hour increments. Point the remote control at the signal receiver window on the unit. 1 Press the OFF TIMER button and set the time as desired. • The time setting will change as you press the button as follows. 0.5h 1.0h 1.5h 10h 11h 12h Hold the button down to speed through the settings. • The orange TIMER lamp on the unit will light. 1 • The unit will emit a beep when it receives the signal. • The time setting will count down to show the re- maining time. TO CANCEL TIMER Press the CANCEL button. • The orange TIMER lamp on the unit will turn off. Display shown when you set the unit to turn off 2.5 hours later. NOTES ON TIMER SETTING AND OPERATION • The latest time setting will be memorized and will appear on the remote control display the next time you set the OFF TIMER or ON TIMER. • The OFF TIMER and ON TIMER can not be set together. Only the most recent TIMER setting will be valid. • While the ONE-HOUR OFF TIMER is set, the OFF TIMER and ON TIMER is settings are unavailable. • If the ONE-HOUR OFF TIMER is set while the OFF TIMER or ON TIMER activated, the ON TIMER or OFF TIMER setting will be cancelled. • If a power failure occurs while the OFF TIMER or ON TIMER is set, the TIMER setting will be cancelled and will not be retrieved even after the power is restored. E-24