Sharp DK-CL6N DK-CL6N Operation Manual - Page 12

Alarm and sleep operation (continued) ■ Activate and deactivate the alarm 1 Press an ALARM 1 or ALARM 2 button to preview current alarm times and source. 2 Within 2 seconds, press again to activate or deactivate the alarm function. 1 beep sound will indicate the alarm is activated or deactivated. When activate the alarm setting time, wake up source and alarm icon ( 1 or 2) appear on display. Daily Alarm: ● During alarm is function, press ALARM RESET button to stop alarm and it will come again on the next day. Sure Alarm: ● When power failure, the buzzer alarm will function if the backup batteries are installed. ■ Snooze function Once alarm has started, pressing the SNOOZE/DIMMER button will stop alarm for 9 minutes. Once the snooze time has expired, alarm will continue. The snooze function can be operated during 1 hour alarm cycle. ■ Sleep operation The radio and iPod can be turned off automatically. 1 Playback the desired sound source. 2 Press the SLEEP button on the main unit or remote control (DK-CL6N only) to select sleep time. To confirm the remaining sleep time: 1 While "SLEEP" is indicated, press the SLEEP button once to select "SLEEP XXX". "XXX" is sleep remaining time. ● The remaining sleep time is displayed for about 10 seconds. ● You can change the remaining sleep time while it is displayed by pressing the SLEEP button (step 2). To cancel the sleep operation: Press the ON/STAND-BY button while "SLEEP" is indicated. To cancel the sleep operation without setting the unit to the stand-by mode, proceed as follows. 1 While "SLEEP" is indicated, press the SLEEP button to select "SLEEP OFF". ■ To use alarm and sleep operation together Sleep and alarm: For example, you can fall asleep listening to the radio and wake up to iPod in the next morning. 1 Set the sleep time (see left, steps 1 - 4). 2 While the sleep timer is set, set the alarm (steps 1 - 4, page 11). 3 Activate the alarm (page 12). Sleep timer setting Alarm setting End time 10 minutes - 2 hours Sleep operation will automatically stop 1 hour Alarm start time 3 After 10 seconds the display will return to previous mode and sleep indicator appears. 12