Sharp ER-A450T Programmer Manual - Page 17

[JOB#996, 998] RAM DATA BACKUP function (ECR ECR, ECR ER-02FD) [JOB#996] RAM data send All data Send to ECR or ER-02FD 996 @/FOR X CA/AT (Baud rate setting:#903-A) SBTL Send to ECR (Auto baud rate setting) X : SSP = 0 Standard RAM (128KB) = 1 Optional RAM: ER-03RA (512KB) = 2 Only nacessary when the ER-01FD or ER-02FD is being used. [JOB#998] RAM data receive Receive from ECR or ER-02FD 998 @/FOR CA/AT (Baud rate setting:#903-A) SBTL Receive from ECR (Auto baud rate setting) [JOB#987] MRS = 0 MRS = 0 Text Changing (To Default text) 0 987 @/FOR X CA/AT X: 0 = English text 2 = French text When this job is executed, below texts are set as default data. (a) Function text (b) Cashier text (c) Each message text (LOGO, etc..) 5. PC software utility (1) Outline This Specification document describes the "02FD.EXE" PC utility. The "02FD.EXE" works with the Windows95/98 operating systems and has the following functions by connecting ER-A450T via RS232. 02FD.EXE : All RAM Data Upload/Download (2) Environment PC and ER-A450T are connected by RS232. Connect the PORT2(CH1) of the ER-A450T to the RS-232 interface of the PC. ER-A450T Channel No. Channel No. Port1(CH8) Port2(CH1) RS232 cable PC RS232 Cable pin out : [ER-A450T] SD 3 RD 2 RTS 7 DCD 1 DTR 4 DSR 6 CTS 8 SG 5 [PC] 3 SD 2 RD 7 RTS 1 DCD 4 DTR 6 DSR 8 CTS 5 SG