Sharp ER-A450T Programmer Manual - Page 43

Note: The associated department is changed if the operator depress [DPTn] key instead of [PLUn] key by mistake at this programming step. Triple depression of the [PLU] or [PLUn] key is necessary for the first entry. 7) PROGRAMMING OF PLU/SUBDEPT Mode : PGM2 PLUn XXXXXX PLU PLU code Not changed ABCDEFG for next code @/FOR CA/AT XXXXXX: PLU CODE (1 to 999999) A: Sign A + 0 - 1 B: Food stamp B Non-food stampable 0 Food stampable 1 C: Taxable4 C Non taxable 0 Taxable 1 D: Taxable3 D Non taxable 0 Taxable 1 E: Taxable2 E Non taxable 0 Taxable 1 F: Taxable1 F Non taxable 0 Taxable 1 G: Amount entry type G Inhibited 0 Open 1 Preset 2 Open and preset 3 Delete 4 If the record of the entered PLU code is not in the PLU file at this programming step, the PLU code will be created. MRS = 002 * If the [PLU] or [PLUn] key is depressed, the programming mode is changed from the "PRICE PROGRAMMING" to "ATTRIBUTE PROGRAMMING" and then changed to the "PLU ASSOCIATION PROGRAMMING" by depressing the same key again. Double depression of [PLU] or [PLUn] key is necessary for the first time. 8) UPC PRESET PRICE SETTING Mode:PGM1/PGM2 (Scanning) (Pricel) No change XXXXXXXXXXXXX UPC YYYYYY SBTL CA/AT P1 P2 P3 (Pricel shift) XXXXXXXXXXXXX: UPC code YYYYYY: Unit price (6 digits) If the record of the entered UPC code is not in the UPC file at this programming step, the UPC code will be created. MRS = Nothing (Default = 0) The default value is set when the new UPC record is created. At this time, Price1 is shown. If the [UPC] key is depressed, the programming mode is changed from "PRICE PROGRAMMING" to "ATTRIBUTE PROGRAMMING" and then changed to the "UPC ASSOCIATION PROGRAMMING" by depressing the same key again. 9) PROGRAMMING OF UPC Mode : PGM2 (Scanning) No change XXXXXXXXXXXXX UPC code UPC ABCDEFG @/FOR CA/AT XXXXXXXXXXXXX: UPC code A: Sign A + 0 - 1 B: Food stamp B No 0 Yes 1 C: Taxable4 C Non taxable 0 Taxable 1 D: Taxable3 D Non taxable 0 Taxable 1 E: Taxable2 E Non taxable 0 Taxable 1 F: Taxable1 F Non taxable 0 Taxable 1 G: Record delete method G Delete at X/Z non-accessed UPC deleting JOB 0 Non delete 1 Delete now 2 If the record of the entered UPC code is not in the UPC file at this programming step, the UPC code is created. MRS = nothing ( Default = 0000000) The default value is set when the new UPC record is created.