Sharp LC-60LE810UN Service Manual
Sharp LC-60LE810UN Manual
 |
UPC - 074000372580
View all Sharp LC-60LE810UN manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp LC-60LE810UN manual content summary:
- Sharp LC-60LE810UN | Service Manual - Page 1
PUBLIC MODE SETTING PROCEDURE......5-15 CHAPTER 1. SPECIFICATIONS [1] SPECIFICATIONS (LC-40/46LE810UN)........ 1-1 [2] SPECIFICATIONS (LC-52/60LE810UN)........ 1-2 CHAPTER 2. OPERATION MANUAL [1] Parts Name 2-1 [2] OPERATION MANUAL 2-3 CHAPTER 6. TROUBLESHOOTING TABLE [1] TROUBLESHOOTING TABLE - Sharp LC-60LE810UN | Service Manual - Page 2
F7000 (250V 3.5A) (LC-40LE810UN) F7001 (250V 3.5A) (LC-40LE810UN) F7000 (250V 5A) (LC-46/52/60LE810UN) F7001 (250V 5A) (LC-46/52/60LE810UN) • Using two clip leads, connect a 1.5k ohm, 10 watt resistor paralleled by a 0.15µF capacitor in series with all exposed metal cabinet parts and a known earth - Sharp LC-60LE810UN | Service Manual - Page 3
POUR LA PROTECTION CONTINUE CONTRE LES RISQUES D'INCENDIE, REMPLACER LE FUSIBLE F7000 (250V 3.5A) (LC-40LE810UN) F7001 (250V 3.5A) (LC-40LE810UN) F7000 (250V 5A) (LC-46/52/60LE810N) F7001 (250V 5A) (LC-46/52/60LE810UN) • A l'aide de deux fils à pinces, brancher une résistance de 1.5 kΩ 10 watts en - Sharp LC-60LE810UN | Service Manual - Page 4
steel wool or fine sandpaper. • Be careful when replacing parts with polarity indication on the PWB silk. Lead-free wire solder for servicing PARTS CODE ZHNDAi123250E ZHNDAi126500E ZHNDAi12801KE PRICE RANK BL BK BM PART DELIVERY J J J DESCRIPTION φ0.3mm 250g (1roll) φ0.6mm 500g (1roll) φ1.0mm - Sharp LC-60LE810UN | Service Manual - Page 5
Unit (LC-60LE810UN), x4 LED PWB Unit (LC-60LE810UN), x4 Ref No. N N N N Part No. R1LK400D3LWF2Z R1LK460D3LWA2Z R1LK520D3LWA2Z R1LK600D3LW2BZ 40" LCD Panel Module Unit 46" LCD Panel Module Unit 52" LCD Panel Module Unit 60" LCD Panel Module Unit „IC FOR EXCLUSIVE USE OF THE SERVICE Description - Sharp LC-60LE810UN | Service Manual - Page 6
LC-40/46/52/60LE810UN (1st Edition) LCC-H40ALE8P10TUNER 1. SPECIFICATIONS [1] SPECIFICATIONS (LC-40/46LE810UN) Service Manual LCD panel Item Size Resolution Model: LC-40LE810UN 40" Class (40" Diagonal) 2,073,600 pixels (1,920 x 1,080) Model: LC-46LE810UN 46" Class (45 63/64" Diagonal) TV- - Sharp LC-60LE810UN | Service Manual - Page 7
[2] SPECIFICATIONS (LC-52/60LE810UN) LC-40/46/52/60LE810UN (1st Edition) LCD panel Item Size Resolution Model: LC-52LE810UN 52" Class (52 1/32" Diagonal) 2,073,600 pixels (1,920 x 1,080) Model: LC-60LE810UN 60" Class (60 1/32 Diagonal) TV-standard (CCIR) American TV Standard ATSC/NTSC System - Sharp LC-60LE810UN | Service Manual - Page 8
LC-40/46/52/60LE810UN (1st Edition) LCC-H40ALE8P10TUNER 2. OPERATION MANUAL [1] Parts Name TV (Front) Service Manual Center Icon illumination Remote control sensor OPC sensor*1 VOLl /k INPUT POWER *2 CHu /t MENU *1 OPC: Optical Picture Control *2 Using the touch sensor panel. TV (Rear) *1 - Sharp LC-60LE810UN | Service Manual - Page 9
10 11 12 13 14 15 16 17 18 LC-40/46/52/60LE810UN (1st Edition) 1 POWER: Switch the TV power on or enter standby. 2 TV, STB, DVD • VCR, AUDIO: Switches the remote control for TV, STB, DVD, BD, VCR and AUDIO operation. * To enter the code registration mode, you need to press an appropriate button - Sharp LC-60LE810UN | Service Manual - Page 10
LC-40/46/52/60LE810UN (1st Edition) [2] OPERATION MANUAL Attaching the Stand • Before attaching (or detaching) the stand, unplug the AC cord. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. CAUTION • Attach the stand in the - Sharp LC-60LE810UN | Service Manual - Page 11
) 39 1/16 (992) 34 61/64 (887.8) 11 13/16 (300) 19 45/64 (500.4) 15 59/64 (404) LC-40/46/52/60LE810UN (1st Edition) Service Manual Unit: inch (mm) 17 47/64 (450) 1 37/64 (40) 4 57/64 (124) AN-3+7P30 AN-37AG2 11 13/16 (300) 5 13/64 (132) 10 27/32 - Sharp LC-60LE810UN | Service Manual - Page 12
2 1/64 (51) 30 7/8 (784) 28 7/8 (733) LC-40/46/52/60LE810UN (1st Edition) [2] DIMENSIONS (LC-46LE810UN) 44 19/64 (1125) 40 13/64 (1020.8) 15 3/4 (400) 22 21/32 (575.4) 17 31/64 (444) Unit: inch (mm) 21 17/64 (540) 1 37/64 (40) 6 15/64 (158) AN-52AG4 15 3/4 (400) 8 5/16 (211) 13 25 - Sharp LC-60LE810UN | Service Manual - Page 13
) 49 37/64 (1259) 45 15/32 (1154.8) 15 3/4 (400) 25 5/8 (650.8) 19 1/16 (484) LC-40/46/52/60LE810UN (1st Edition) Unit: inch (mm) 21 17/64 (540) 1 37/64 (40) 6 15/64 (158) AN-52AG4 15 3/4 (400) 6 25/32 (172) 13 25/64 (340) 2 41/64 (67) 1 - Sharp LC-60LE810UN | Service Manual - Page 14
2 29/64 (62) 38 23/64 (974) 35 59/64 (912) LC-40/46/52/60LE810UN (1st Edition) [4] DIMENSIONS (LC-60LE810UN) 56 5/8 (1438) 52 7/16 (1331.8) 15 3/4 (400) 29 35/64 (750.4) 21 1/2 (546) Unit: inch (mm) 22 27/32 (580) 1 37/64 (40) 6 55/64 (174) AN-52AG4 4 49/64 (121) 15 3/4 (400) 14 1/2 (368 - Sharp LC-60LE810UN | Service Manual - Page 15
-40/46/52/60LE810UN (1st Edition) LCC-H40ALE8P10TUNER 4. REMOVING OF MAJOR PARSTeSrvice Manual [1] REMOVING OF MAJOR PARTS (LC-40LE810UN) 1. Removing of Stand Unit and Rear Cabinet Ass'y. 1. Remove the 1 lock screw and detach the AC code cover . 2. Detach the Stand cover . 3. Remove the 2 lock screw - Sharp LC-60LE810UN | Service Manual - Page 16
LC-40/46/52/60LE810UN (1st Edition) 2. Removing of Speaker-L/R. 1. Remove the 1 lock screw and detach the Stand cover . 2. Disconnect SP wire. 3. Detach the Speaker-L , Speaker-R . MAIN Unit [SP] Speaker-R 4 [SP] 3 Speaker-L 2 Stand Cover 1 4 - 2 - Sharp LC-60LE810UN | Service Manual - Page 17
/46/52/60LE810UN (1st Edition) 3. Removing of LCD Panel Module, TOUCH SENSOR Unit, ICON Unit, R/C, LED Unit, Front Cabinet Ass'y. 1. Remove the 1 lock screw and detach the LCD Fixing Metal Angle B-R . 2. Remove the 5 lock screws , 3 lock screws , 4 Hooks and detach the LCD Panel Module 3. Disconnect - Sharp LC-60LE810UN | Service Manual - Page 18
LC-40/46/52/60LE810UN (1st Edition) 4. Removing of Connectors 1. Disconnect the following connectors from the MAIN Unit. (SB, LB, PD, LW) 2. Disconnect the following connectors from the POWER/ LED DRIVE Unit. (L1, L2, LB, PD) 3. Disconnect the following connectors from the LCD Control Unit. (LW, PL) - Sharp LC-60LE810UN | Service Manual - Page 19
LC-40/46/52/60LE810UN (1st Edition) 5. Removing of MAIN Unit, POWER/LED DRIVE Unit, Sub Woofer, Stand Angle Ass'y 1. Remove the 7 lock screws and detach the MAIN Unit 2. Remove the 2 lock screws and detach the TERMINAL - Sharp LC-60LE810UN | Service Manual - Page 20
/46/52/60LE810UN (1st Edition) [2] REMOVING OF MAJOR PARTS (LC-46LE810UN) 1. Removing of Stand Unit and Rear Cabinet Ass'y. 1. Remove the 1 lock screw and detach the AC code cover Ass'y . 2. Detach the Stand cover . 3. Remove the 2 lock screws and detach the Stand Ass'y . 4. Remove the 4 lock screws - Sharp LC-60LE810UN | Service Manual - Page 21
2. Removing of Speaker-L/R. 1. Remove the 1 lock screw and detach the Stand cover . 2. Disconnect SP wire. 3. Detach the Speaker-L , Speaker-R . LC-40/46/52/60LE810UN (1st Edition) MAIN Unit [SP] Speaker-R 4 [SP] 3 Speaker-L 2 Stand Cover 1 4 - 7 - Sharp LC-60LE810UN | Service Manual - Page 22
/46/52/60LE810UN (1st Edition) 3. Removing of LCD Panel Module, TOUCH SENSOR Unit, ICON Unit, R/C, LED Unit, Front Cabinet Ass'y. 1. Remove the 1 lock screw and detach the LCD Fixing Metal Angle B-R . 2. Remove the 5 lock screws , 5 lock screws , 4 Hooks and detach the LCD Panel Module 3. Disconnect - Sharp LC-60LE810UN | Service Manual - Page 23
40/46/52/60LE810UN (1st Edition) 4. Removing of Connectors 1. Disconnect the following connectors from the MAIN Unit. (SB, LB, PD, LW) 2. Disconnect the following connectors from the POWER/ LED DRIVE Unit. (L1, L2, LB, PD, PL) 3. Disconnect the following connectors from the LCD Control Unit. (LW, PL - Sharp LC-60LE810UN | Service Manual - Page 24
LC-40/46/52/60LE810UN (1st Edition) 5. Removing of MAIN Unit, POWER/LED DRIVE Unit, Sub Woofer, Stand Angle Ass'y 1. Remove the 7 lock screws and detach the MAIN Unit 2. Remove the 2 lock screws and detach the TERMINAL - Sharp LC-60LE810UN | Service Manual - Page 25
[3] REMOVING OF MAJOR PARTS (LC-52LE810UN) LC-40/46/52/60LE810UN (1st Edition) 1. Removing of Stand Unit and Rear Cabinet Ass'y. 1. Remove the 1 lock screw and detach the AC code cover Ass'y . 2. Detach the Stand cover . 3. Remove the 2 lock screws and detach the Stand Ass'y . 4. Remove the 4 lock - Sharp LC-60LE810UN | Service Manual - Page 26
LC-40/46/52/60LE810UN (1st Edition) 2. Removing of Speaker-L/R. 1. Remove the 2 lock screws and detach the Stand cover . 2. Disconnect SP wire. 3. Detach the Speaker-L , Speaker-R . MAIN Unit [SP] Speaker-R 4 [SP] 3 Speaker-L 2 Stand Cover 1 4 - 12 - Sharp LC-60LE810UN | Service Manual - Page 27
/46/52/60LE810UN (1st Edition) 3. Removing of LCD Panel Module, TOUCH SENSOR Unit, ICON Unit, R/C, LED Unit, Front Cabinet Ass'y. 1. Remove the 1 lock screw and detach the LCD Fixing Metal Angle B-R . 2. Remove the 5 lock screws , 6 lock screws , 4 Hooks and detach the LCD Panel Module 3. Disconnect - Sharp LC-60LE810UN | Service Manual - Page 28
40/46/52/60LE810UN (1st Edition) 4. Removing of Connectors 1. Disconnect the following connectors from the MAIN Unit. (SB, LB, PD, LW) 2. Disconnect the following connectors from the POWER/ LED DRIVE Unit. (L1, L2, LB, PD, PL) 3. Disconnect the following connectors from the LCD Control Unit. (LW, PL - Sharp LC-60LE810UN | Service Manual - Page 29
LC-40/46/52/60LE810UN (1st Edition) 5. Removing of MAIN Unit, POWER/LED DRIVE Unit, Sub Woofer, Stand Angle Ass'y 1. Remove the 7 lock screws and detach the MAIN Unit 2. Remove the 2 lock screws and detach the TERMINAL - Sharp LC-60LE810UN | Service Manual - Page 30
(1st Edition) [4] REMOVING OF MAJOR PARTS (LC-60LE810UN) 1. Removing of Stand Unit and Rear Cabinet Ass'y. 1. Remove the 1 lock screw and detach the AC code cover Ass'y . 2. Remove the 3 lock screws and detach the Support Cover . 3. Remove the 4 lock screws and detach the Stand Ass'y . 4. Remove - Sharp LC-60LE810UN | Service Manual - Page 31
2. Removing of Speaker-L/R. 1. Remove the 2 lock screws and detach the Stand cover . 2. Disconnect SP wire. 3. Detach the Speaker-L , Speaker-R . LC-40/46/52/60LE810UN (1st Edition) MAIN Unit [SP] Speaker-R 4 [SP] 3 Speaker-L 2 Stand Cover 1 4 - 17 - Sharp LC-60LE810UN | Service Manual - Page 32
-40/46/52/60LE810UN (1st Edition) 3. Removing of LCD Panel Module, TOUCH SENSOR Unit, ICON Unit, R/C, LED Unit, Front Cabinet Ass'y. 1. Remove the 1 lock screw and detach the LCD Fixing Metal Angle B-R . 2. Remove the 4 lock screws and detach the 2 Stand Angle . 3. Remove the 2 lock screws , 4 lock - Sharp LC-60LE810UN | Service Manual - Page 33
40/46/52/60LE810UN (1st Edition) 4. Removing of Connectors 1. Disconnect the following connectors from the MAIN Unit. (SB, LB, PD, LW) 2. Disconnect the following connectors from the POWER/ LED DRIVE Unit. (L1, L2, LB, PD, PL) 3. Disconnect the following connectors from the LCD Control Unit. (LW, PL - Sharp LC-60LE810UN | Service Manual - Page 34
LC-40/46/52/60LE810UN (1st Edition) 5. Removing of MAIN Unit, POWER/LED DRIVE Unit, Sub Woofer, Stand Angle the 2 lock screws and detach the TERMINAL Angle S . 4. Remove the 6 lock screws and detach the POWER/LED DRIVER Unit . 5. Remove the 4 lock screws and detach the Sub Woofer . 1 2 MAIN Unit - Sharp LC-60LE810UN | Service Manual - Page 35
LCC-H40ALE8P10TUNER 5. ADJUSTMENT LC-40/46/52/60LE810UN (1st Edition) Service Manual [1] ADJUSTMENT PROCEDURE The adjustment values are set to the optimum conditions at the factory before shipping. If a value should become improper or an adjustment is required due to part replacement, make an - Sharp LC-60LE810UN | Service Manual - Page 36
LC-40/46/52/60LE810UN (1st Edition) 2.2.3 How to upgrade the software 1. Plug AC cord and turn on the TV. 2. After picture displayed, touch the power key for 5seconds. NOTE: Picture will disappear when you touch the power key, but keep touching it. 3. When the center icon LED blinks, release your - Sharp LC-60LE810UN | Service Manual - Page 37
LC-40/46/52/60LE810UN (1st Edition) 2.3. turn on the TV. 2. After picture displayed, touch the power key for 5seconds. NOTE: Picture will disappear when you touch the power key, but keep touching it. 3. When the center icon LED blinks, release your finger from the power key. 4. Next, touch the "POWER - Sharp LC-60LE810UN | Service Manual - Page 38
LC-40/46/52/60LE810UN (1st Edition) 3. Entering and exiting the adjustment process mode 1) Before entering the adjustment process mode, the AV position RESET in the video adjustment menu. 2) At the state TV is turned on, touch the power process mode. If the settings are tampered in this mode, - Sharp LC-60LE810UN | Service Manual - Page 39
Version LCD CON Version / LED CON Version Netflix ESN FRC-N Auto Script Version TCON Master/Slave Serial Version TOUCH SENSOR UCON VERSION TEMPERATURE LAMP ERROR MONITOR ERR CAUSE NORMAL STANDBY CAUSE ERROR STANDBY CAUSE INDUSTRY INIT INDUSTRY INIT(-Hotel) PUBLIC MODE Center Acutime RESET Backlight - Sharp LC-60LE810UN | Service Manual - Page 40
LC-40/46/52/60LE810UN (1st Edition) Page 7 8 9 10 11 12 13 Line 1 2 3 4 5 6 7 1 1 2 3 4 5 6 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 MG5Y MG6R MG6G MG6B MG6Y MG6Y OFFSET MODE SELECT POS SELECT POS MIN POS MID1 detail, etc.) Adjustment gradation setting. Parameter for six-point adjustment - Sharp LC-60LE810UN | Service Manual - Page 41
MAX TEMP MONITOR ERROR CAUSE RESET LCD TEST PATTERN LCD TEST PATTERN1 LCD TEST PATTERN2 LCD TEST PATTERN3 LCD TEST PATTERN4 TV TEST PATTERN 1 TV TEST PATTERN 2 FRC-N Firmware Version FRC-N Boot Script Version FRC-N Device Version TCON FPGA1 Serial Flash Version TCON FPGA2 Serial Flash Version TCON - Sharp LC-60LE810UN | Service Manual - Page 42
abnormality of LCD controller 6. Special features * STANDBY CAUSE (Page 1/24) Display of a cause (code) of the last standby The cause of the last standby is recorded in EEPROM whenever possible. Checking this code will be useful in finding a problem when you repair the troubled set. * EEP SAVE - Sharp LC-60LE810UN | Service Manual - Page 43
turn off the pattern. CAUTION: * Make adjustment with no ANT signal (since the brightness is changed by the active backlight). [Adjustment position] 1/4 3/4 1/2 1/2 8.2. Image adjustment 8.2.1 Device check Before adjustment, check that the adjustment jig and signal source are set for Sharp LCD - Sharp LC-60LE810UN | Service Manual - Page 44
LC-40/46/52/60LE810UN (1st Edition) 8.2.3 Composite N358 signal/tuner adjustment Adjustment point 1 Setting Adjustment conditions N358 when [ N358 ALL ADJ(INPUT2) OK] is displayed. Adjustment point 1 Setting Adjustment conditions Adjustment procedure 480i signal •Send the 100% color bar signal - Sharp LC-60LE810UN | Service Manual - Page 45
8.2.7 Tuner/V-CHIP adjustment LC-40/46/52/60LE810UN (1st Edition) Adjustment point 1 Setting 2 Automatic adjustment execution Adjustment conditions NTSC RF signal US-7(AIR)ch Adjustment procedure •Send the NTSC signal to the RF antenna input. Point the cursor - Sharp LC-60LE810UN | Service Manual - Page 46
Model Integrated Monitor WB Adjustment Specification V1.92".) Adjustment Adjustment conditions Adjustment procedure point 1 Setting 1) Set the unit to the following conditions. AV MODE: [DYNAMIC] Backlight: +16 Active Backlight: OFF Aging Time: Min. 60 minutes 2) Connect the unit with the - Sharp LC-60LE810UN | Service Manual - Page 47
X=0.272 y=0.277 ±0.0030 ±0.0060 Point 1 180 X=0.272 y=0.277 ±0.004 ±0.0080 Remarks Setting conditions for inspection AV MODE: [DYNAMIC] (Reset) Monochro: ON Active Backlight: OFF Aging Time: Min. 60 minutes 10. Key writing 10.1. EDID writing (Main PWB: QPWBXF452WJZZ) Adjustment point - Sharp LC-60LE810UN | Service Manual - Page 48
LC-40/46/52/60LE810UN (1st Edition) 11. Factory setting After completing the factory setting, pull out the AC cord to complete the setting. CAUTION: Do not turn on the power after completing the factory setting. If the power is turned on, configure the factory setting again. Adjustment point - Sharp LC-60LE810UN | Service Manual - Page 49
[2] PUBLIC MODE SETTING PROCEDURE 1. How to start Public Mode • There are the following 3 ways to get the public mode setup screen displayed. In the adjustment process mode, turn on "PUBLIC MODE" 1) Plug AC cord and turn on the TV. 2) After picture displayed, touch the "POWER" key for 5seconds. NOTE - Sharp LC-60LE810UN | Service Manual - Page 50
controller and set). PUBLIC MODE POWER ON FIXED MAXIMUM VOLUME VOLUME FIXED VOLUME FIXED LEVEL RC BUTTON PANEL BUTTON MENU BUTTON AV POSITION FIXED ON SCREEN DISPLAY INPUT MODE START INPUT MODE FIXED LOUD SPEAKER RC_PATH_THROUGH 232C POWON PUBLIC MODE RESET EXECUTE [VARIABLE ] [ 60 ] [VARIABLE - Sharp LC-60LE810UN | Service Manual - Page 51
and the image is kept being received. The power can be turned off by stopping the power supply from AC. Refer to the "Power-On Fixed" sheet. None • In "Variable" setting, the power operation is in wait for 1 sec. and then turned off when the main power switch is off. 2) MAXIMUM VOLUME Selection - Sharp LC-60LE810UN | Service Manual - Page 52
"INPUT 1/2/3", "PC", "HDMI 1/2/3/4/5", "DVI" (loop provided) Normal In power-ON, the input source to be started or channel can be set. (In standard mode, the operation follows the last memory.) • All the input sources in the model are made selectable. • In TV mode, the channel to be set follows the - Sharp LC-60LE810UN | Service Manual - Page 53
INPUT MODE FIXED LC-40/46/52/60LE810UN (1st Edition) Selection Default Explanation Limit in Setting Exception Remarks Selection between "Variable", "Fixed", "ACON (AC CTRL)" and "AC/RCON (AC/RC CTRL)" (loop provided) - (Variable) • At the "Fixed" setting, the TV set gets started with the settings - Sharp LC-60LE810UN | Service Manual - Page 54
LC-40/46/52/60LE810UN (1st Edition) 15)PUBLIC MODE (ON/OFF) Selection Default Explanation Limit in Setting Exception Remarks Selection between "ON" and "OFF" (loop provided) OFF In case of "ON", public mode settings are effected. None None The public-mode settings are operable only when this item - Sharp LC-60LE810UN | Service Manual - Page 55
LC-40/46/52/60LE810UN (1st Edition) LCC-H40ALE8P10TUNER 6. TROUBLESHOOTING TABLEService Manual [1] TROUBLESHOOTING TABLE No video (1) COMPOSITE: No external input video [INPUT-2] Is INPUT-2 selected on the input select menu screen? YES NO Select INPUT-2 on the input - Sharp LC-60LE810UN | Service Manual - Page 56
LC-40/46/52/60LE810UN (1st Edition) No video (2) COMPONENT: No external input video [INPUT-1] Is INPUT-1 selected on the input select menu screen? Is the INPUT-SELECT for the - Sharp LC-60LE810UN | Service Manual - Page 57
No video (3) LC-40/46/52/60LE810UN (1st Edition) No video at UHF/VHF broadcast signal reception No video at digital broadcast signal reception Is the specified TV signal selected on the input select menu screen? Is there the analog video signal output (VIDEO) at pin (15) of tuner (TU1102)? Are - Sharp LC-60LE810UN | Service Manual - Page 58
LC-40/46/52/60LE810UN (1st Edition) No video (4) PC: No external input video [INPUT-3] Is INPUT-3 selected on the input select menu screen? NO Select INPUT-3 on the input select menu screen for the right input signal. YES Is IC509 (EEPROM) accessed by I2C, with PC connected, to read the DDC_I2C - Sharp LC-60LE810UN | Service Manual - Page 59
> No video (5)-1 LC-40/46/52/60LE810UN (1st Edition) HDMI: No external input video [INPUT-4] HDMI: No external input pin43/pin44) accessed by I2C, with HDMI connected, to read the DDC_I2C SDA/SCL data? NO Is IC1504(pin39/pin40) accessed by I2C, with HDMI connected, to read the DDC_I2C SDA/SCL - Sharp LC-60LE810UN | Service Manual - Page 60
LC-40/46/52/60LE810UN (1st Edition) No video (5)-2 HDMI: No external input video [INPUT-6] HDMI: No pin33/pin34) accessed by I2C, with HDMI connected, to read the DDC_I2C SDA/SCL data? NO Is IC1504 (pin29/pin30) accessed by I2C, with HDMI connected, to read the DDC_I2C SDA/SCL - Sharp LC-60LE810UN | Service Manual - Page 61
No audio (1) LC-40/46/52/60LE810UN (1st Edition) INPUT-1 No audio. INPUT-2 No external input video [INPUT-2]". YES Is the audio output selected for "VARIABLE" on the menu screen? NO YES Set the audio output to "FIXED". Does the audio signal come from pins (4) (L) and (3) (R) of input terminal - Sharp LC-60LE810UN | Service Manual - Page 62
LC-40/46/52/60LE810UN (1st Edition) No audio (2) [PC analog audio input] INPUT-3 No audio. [HDMI analog audio input] INPUT-4 pin (8/9/7) (SP_BCLK/SP_LRCLK/SP_DATA) of IC2701 (Audio DSP)? NO Set the "PC input" - "Analog select" to "HDMI + Analog. NO Check the line between IC3302 and IC2701, and - Sharp LC-60LE810UN | Service Manual - Page 63
LC-40/46/52/60LE810UN (1st Edition) No audio at UHF/VHF broadcast signal reception. No audio at digital broadcast signal reception. Is TV selected on the input select menu screen? Is TV to "No video at digital broadcast signal reception". NO Set the audio output to "FIXED". Is the audio output - Sharp LC-60LE810UN | Service Manual - Page 64
LC-40/46/52/60LE810UN (1st Edition) No audio (4) INPUT-4 No audio (HDMI connected) INPUT-5 No audio (HDMI connected) INPUT-6 No audio (HDMI connected) INPUT-7 No audio (HDMI connected video (HDMI) [INPUT-7]". Is the audio output selected for "VARIABLE" on the menu screen? YES NO Set the audio - Sharp LC-60LE810UN | Service Manual - Page 65
LC-40/46/52/60LE810UN (1st Edition) No audio signal at Digital Audio Output terminal (Analog sound heard) No INPUT-4/5/6/7 (HDMI) audio. No audio at digital broadcast signal reception. If no video appears, refer to "No external input video (HDMI) [INPUT-4/5/6/7]". If no video appears, refer to " - Sharp LC-60LE810UN | Service Manual - Page 66
LC-40/46/52/60LE810UN (1st Edition) No monitor audio output Is the audio output from the monitor set their peripheral circuits, and speakers and the Cable. No connect network Does the signal come to 1pin of LAN-jack device and peripheral circuits. (power-LED of hub, LINK-LED of hub) Check - Sharp LC-60LE810UN | Service Manual - Page 67
LC-40/46/52/60LE810UN (1st Edition) If it is not an error of power supply/LED driver, It is start-up in the lamp error disregard mode. Do you start? Does all LED of one line are not lighting? YES NO It doesn't light in 1 piece. All LED boards including LED that - Sharp LC-60LE810UN | Service Manual - Page 68
LC-40/46/52/60LE810UN (1st Edition) Trouble Shooting Panel Module When C-S FPC(2 pieces) is replaced, Replace Panel HIRAKI. (Adjust "VCOM ADJ" after replace Panel HIRAKI) [2] LED flashing specification at the time of an error (Center icon LED used) 1. Display method • Since only the center icon LED - Sharp LC-60LE810UN | Service Manual - Page 69
Flashes once Flashes twice Flashes 3 times Flashes 5 times Flashes once Flashes twice Flashes 3 times Flashes 5 times Flashes once Flashes twice Flashes 3 times - - Power supply error 1 (*2) AC_DET error Power supply error 2 (*2) UR+13V error Power supply error 3 (*2) D3.3V error Panel power supply - Sharp LC-60LE810UN | Service Manual - Page 70
LC-40/46/52/60LE810UN (1st Edition) LED flashing timing chart at the time of an error 100ms 400ms 1.6sec 1) Slow flashing Error type Inverter/ Lamp failure Flashes slowly once Power failure Flashes slowly twice H: On L: Off H: On Center icon LED operation Main CPU to main CPU communication - Sharp LC-60LE810UN | Service Manual - Page 71
H: On L: Off 5) Other failure details (Flashes slowly 4 times and flashes fast) Error type Center icon LED operation Monitor temperature failure Flashes fast once H: On L: Off Main failure H: On Flashes fast 3 times L: Off LC-40/46/52/60LE810UN (1st Edition) Note Basically, debug print - Sharp LC-60LE810UN | Service Manual - Page 72
Communication error D Communication error E Communication error F Communication error H Panel-related error Other error 2 Power supply error 1 Power supply error 2 Power supply error 3 Power supply error 5 Other error 3 Error description Initial communication from the main CPU is not received. Only - Sharp LC-60LE810UN | Service Manual - Page 73
LC-40/46/52/60LE810UN (1st Edition) LCC-H40ALE8P10TUNER 7. MAJOR IC INFORMATIONS Service Manual [1] MAJOR IC INFORMATIONS 1. MAJOR IC INFORMATIONS 1.1. IC1504 (VHiSii9287+-1Q) This IC is 4 input and 1 output HDMI port processor. It integrated TMDS receiver and transmitter cores capable of receiving - Sharp LC-60LE810UN | Service Manual - Page 74
LC-40/46/52/60LE810UN (1st Edition) 1.10. IC2701 (VHiYSS951VZ-1Y) Audio DSP (YSS951VZ) has digital audio adjustment function (for example, PEQ, bass/treble, balance, bass enhancer, etc.) and adjusts TVs audio quality. 7 - 2 - Sharp LC-60LE810UN | Service Manual - Page 75
Service Manual I H WOOFER G 40/46"䋺RSP-ZA458WJZZ 52/60"䋺RSP-ZA457WJZZ F E 䇼AC䇽 13 POWER Unit 40"䋺RUNTKA682WJQZ 46"䋺RUNTKA683WJQZ 52"䋺RUNTKA693WJQZ 60 DUNTKF493FM01 7 8 9 10 11 12 8 - 1 LC-40/46/52/60LE810UN (1st Edition) MODULE USB1 Analog RGB HDMI 12 1 䇼SB䇽 9 䇼LB䇽 1 䇼PD䇽 - Sharp LC-60LE810UN | Service Manual - Page 76
LC-40/46/52/60LE810UN ( OUT IC503 OPT OUT T7SET08 OPT_OUT INPUT 3/4 RGB/HDMI Audio (Mini Plug) Mute PC/HDMI_LR From CPU NAND Flash N_SRESET SC8452 Program Update Connector +3.3V IC8401 NAND FLASH D3.3V D1.8V D1.26V D1.05V POWER CIRCUIT UR13V S13V BU5V CEC_0 IC9501 +3.3V Ethernet Bus - Sharp LC-60LE810UN | Service Manual - Page 77
ITEM) [9] PACKING PARTS (LC-46LE810UN) (NOT REPLACEMENT ITEM) [10] PACKING PARTS (LC-52LE810UN) (NOT REPLACEMENT ITEM) [11] PACKING PARTS (LC-60LE810UN) (NOT REPLACEMENT ITEM) [12] SERVICE JIGS (USE FOR SERVICING) Parts marked with " " are important for maintaining the safety of the set. Be sure to - Sharp LC-60LE810UN | Service Manual - Page 78
LC-40/46/52/60LE810UN (1st Edition) NO. PARTS CODE PRICE NEW PART RANK MARK DELIVERY DESCRIPTION [1] PRINTED WIRING BOARD ASSEMBLIES N DKEYMF452FM01 N DUNTKF493FM01 N DUNTKF494FM01 N RUNTKA692WJQZ N RUNTKA682WJQZ N RUNTKA683WJQZ N RUNTKA693WJQZ N RUNTKA684WJQZ N RUNTKA692WJQZ N RUNTK4437TPZZ N - Sharp LC-60LE810UN | Service Manual - Page 79
40/46/52/60LE810UN (1st Edition) [3] CABINET AND MECHANICAL PARTS (LC-40LE810UN) 1 J a 31 30 k K e ICON 1-2 Unit d TOUCH b R/C, SENSOR LED Unit Unit 31 f POWER/LED g 27 DRIVE m Unit n 17 F 23 42 3 27 j 20 MAIN Unit k 17 24 f g B F 12 H 27 27 18 E 40 13 9 27 27 9 27 - Sharp LC-60LE810UN | Service Manual - Page 80
LC-40/46/52/60LE810UN (1st Edition) NO. PARTS CODE PRICE NEW PART RANK MARK DELIVERY DESCRIPTION [3] CABINET AND MECHANICAL PARTS (LC for Sub Woofer) 29 QCNW-K551WJQZ AQ N X Connecting Cord (RA:MAN-EN/KY/RC) 30 QCNW-K554WJQZ AG N X Connecting Cord (SP:MAN-SP(L/R)) 31 RSP-ZA456WJZZ AU - Sharp LC-60LE810UN | Service Manual - Page 81
-40/46/52/60LE810UN (1st Edition) [4] CABINET AND MECHANICAL PARTS (LC-46LE810UN) 1 J 8 a 26 33 L f POWER/LED g DRIVE 26 16 20 34 37 10 h 15 j 41 K 2 2-2 E 2-8 2-1 21 17 6 34 21 34 46" LCD PANEL Module C 34 C 2-9 42 B 2-5 2-7 A 2-6 17 21 20 49 18 51 50 51-3 A 2- - Sharp LC-60LE810UN | Service Manual - Page 82
-40/46/52/60LE810UN (1st Edition) NO. PARTS CODE PRICE NEW PART RANK MARK DELIVERY DESCRIPTION [4] CABINET AND MECHANICAL PARTS (LC-46LE810UN) 1 CCABAC528WJ31 BS N X Front Cabinet Ass'y 1-2 HDECQB442WJ3A AA N X R/C Decoration Cover 2 CCABBB694WE01 BN N X Rear Cabinet Ass'y 2-1 Not - Sharp LC-60LE810UN | Service Manual - Page 83
-40/46/52/60LE810UN (1st Edition) [5] CABINET AND MECHANICAL PARTS (LC-52LE810UN) 1 J K e 1-2 d ICON Unit E 44 2-1 52" LCD PANEL Module 37 18 23 37 23 6 37 23 20 C C 37 37 18 54 A 55 B 2-9 2-6 2-5 2-11 2-7 56 56-3 2-8 A 55 a 45 43 K 8 22 45 f POWER/LED g DRIVE k 37 - Sharp LC-60LE810UN | Service Manual - Page 84
60LE810UN (1st Edition) NO. PARTS CODE PRICE NEW PART RANK MARK DELIVERY DESCRIPTION [5] CABINET AND MECHANICAL PARTS (LC AZ N X Power Barrir ! 3 Connecting Cord (RA:MAN-EN/KY/RC) 43 QCNW-K579WJQZ AG N X Connecting Cord (SP:MAN-SP(L/R)) 44 XBPS730P10WS0 AA J Screw, x6 (for LCD - Sharp LC-60LE810UN | Service Manual - Page 85
(1st Edition) [6] CABINET AND MECHANICAL PARTS (LC-60LE810UN) a 1 21 37 K f 40 g B h j E 19 C 18 46 A n 34 36 h 51 e d b 39 39 24 24 f POWER/LED g DRIVE m 38 Unit 28 n F 31 3 j 54 33 47 kG 25 40 60" LCD PANEL Module 38 43 2 2-2 2-1 B 2-7 2-9 2-8 2-6 2-10 - Sharp LC-60LE810UN | Service Manual - Page 86
-40/46/52/60LE810UN (1st Edition) NO. PARTS CODE PRICE NEW PART RANK MARK DELIVERY DESCRIPTION [6] CABINET AND MECHANICAL PARTS (LC-60LE810UN) 1 CCABAC530WJ31 BV N X Front Cabinet Ass'y 1-2 HDECQB442WJ3A AA N X R/C Decoration Cover 2 CCABBB696WE01 BR N X Rear Cabinet Ass'y 2-1 Not - Sharp LC-60LE810UN | Service Manual - Page 87
[7] SUPPLIED ACCESSORIES X1 X2 LC-40/46/52/60LE810UN (1st Edition) X4 X5 X3 Remote control unit X10 Cable clamp X11 Operation manual "AAA" size battery Support Ass'y Stand Screw Ass'y X8 Connection guide NO. PARTS CODE PRICE NEW PART RANK MARK DELIVERY DESCRIPTION [7] SUPPLIED - Sharp LC-60LE810UN | Service Manual - Page 88
LC-40/46/52/60LE810UN (1st Edition) [8] PACKING PARTS (LC-40LE810UN) (NOT REPLACEMENT ITEM) X1 S8 X2 X5 S7 X11 X4 S5 X11-3 X6 X10 X7 X8 S3 X9 S3 S3 S6 FRONT S2 X3 S4 S4 S1 S11 S11 12 - Sharp LC-60LE810UN | Service Manual - Page 89
LC-40/46/52/60LE810UN (1st Edition) NO. PARTS CODE PRICE NEW PART RANK MARK DELIVERY DESCRIPTION [8] PACKING PARTS (LC-40LE810UN) (NOT REPLACEMENT ITEM) S1 S2 S3 S4 S5 S6 S7 S8 S11 SPAKCF500WJZZ SPAKPB219WJZZ SPAKXC908WJZZ SPAKXC913WJZZ SPAKPB526WJZZ SPAKPB528WJZZ SSAKA0101GJZZ SSAKAA032WJZZ - Sharp LC-60LE810UN | Service Manual - Page 90
LC-40/46/52/60LE810UN (1st Edition) [9] PACKING PARTS (LC-46LE810UN) (NOT REPLACEMENT ITEM) X1 S8 X4 S4 S9 S4 S4 S1 S7 S3 X3 S5 FRONT 5 X10 S5 S5 S5 S2 14 S12 S12 - Sharp LC-60LE810UN | Service Manual - Page 91
-40/46/52/60LE810UN (1st Edition) NO. PARTS CODE PRICE NEW PART RANK MARK DELIVERY DESCRIPTION [9] PACKING PARTS (LC-46LE810UN) (NOT REPLACEMENT ITEM) S1 S2 S3 S4 S5 S6 S7 S8 S9 S12 SPAKCF501WJZZ SPAKCF473WJZZ SPAKPA999WJZZ SPAKXC909WJZZ SPAKXC914WJZZ SPAKPB527WJZZ SPAKPB529WJZZ SSAKA0101GJZZ - Sharp LC-60LE810UN | Service Manual - Page 92
LC-40/46/52/60LE810UN (1st Edition) [10] PACKING PARTS (LC-52LE810UN) (NOT REPLACEMENT ITEM) S8 X1 X4 X6 X8 X9 S9 X2 X5 X11 S4 X11-3 S4 S4 S1 S7 X3 S3 FRONT S5 S6 X10 S5 S5 S5 S2 16 S12 S12 - Sharp LC-60LE810UN | Service Manual - Page 93
40/46/52/60LE810UN (1st Edition) NO. PARTS CODE PRICE NEW PART RANK MARK DELIVERY DESCRIPTION [10] PACKING PARTS (LC-52LE810UN) (NOT REPLACEMENT ITEM) S1 S2 S3 S4 S5 S6 S7 S8 S9 S12 SPAKCF502WJZZ SPACKF474WJZZ SPAKPA992WJZZ SPAKXC910WJZZ SPAKXC915WJZZ SPAKPB527WJZZ SPAKPB529WJZZ SSAKA0101GJZZ - Sharp LC-60LE810UN | Service Manual - Page 94
LC-40/46/52/60LE810UN (1st Edition) [11] PACKING PARTS (LC-60LE810UN) (NOT REPLACEMENT ITEM) X1 S5 S7 X4 S5 X6 X7 X8 S8 X9 X2 X5 S5 S3 S5 S4 S6 S1 S6 S6 S5 S9 S2 S6 18 - Sharp LC-60LE810UN | Service Manual - Page 95
LC-40/46/52/60LE810UN (1st Edition) NO. PARTS CODE PRICE NEW PART RANK MARK DELIVERY DESCRIPTION [11] PACKING PARTS (LC-60LE810UN) (NOT REPLACEMENT ITEM) S1 SPAKCF503WJZZ S2 SPAKCF475WJZZ S3 SPAKPB427WJZZ S4 SPAKPB518WJZZ S5 SPAKXC911WJZZ S6 SPAKXC916WJZZ S7 SSAKA0101GJZZ S8 SSAKAA032WJZZ S9 - Sharp LC-60LE810UN | Service Manual - Page 96
LC-40/46/52/60LE810UN (1st Edition) COPYRIGHT © 2010 BY SHARP CORPORATION ALL RIGHTS RESERVED. No Part of this publication may be reproduced, stored in a retrieval system, or transmitted in any from or by any means, electronic, mechanical, photocopying, recording, or otherwise,
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
 |
 |
SERVICE MANUAL
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
SAFETY PRECAUTION
IMPORTANT SERVICE SAFETY
PRECAUTION
....................................................
i
PRECAUTIONS A PRENDRE LORS DE
LA REPARATION
..............................................
ii
PRECAUTIONS FOR USING LEAD-FREE
SOLDER
..........................................................
iii
OUTLINE
MAJOR SERVICE PARTS
...............................
iv
CHAPTER 1. SPECIFICATIONS
[1]
SPECIFICATIONS (LC-40/46LE810UN)
........
1-1
[2]
SPECIFICATIONS (LC-52/60LE810UN)
........
1-2
CHAPTER 2. OPERATION MANUAL
[1]
Parts Name
...................................................
2-1
[2]
OPERATION MANUAL
.................................
2-3
CHAPTER 3. DIMENSIONS
[1]
DIMENSIONS (LC-40LE810UN)
...................
3-1
[2]
DIMENSIONS (LC-46LE810UN)
...................
3-2
[3]
DIMENSIONS (LC-52LE810UN)
...................
3-3
[4]
DIMENSIONS (LC-60LE810UN)
...................
3-4
CHAPTER 4. REMOVING OF MAJOR PARTS
[1]
REMOVING OF MAJOR PARTS
(LC-40LE810UN)
..........................................
4-1
[2]
REMOVING OF MAJOR PARTS
(LC-46LE810UN)
...........................................
4-6
[3]
REMOVING OF MAJOR PARTS
(LC-52LE810UN)
.........................................
4-11
[4]
REMOVING OF MAJOR PARTS
(LC-60LE810UN)
.........................................
4-16
CHAPTER 5. ADJUSTMENT
[1]
ADJUSTMENT PROCEDURE
......................
5-1
[2]
PUBLIC MODE SETTING PROCEDURE
......
5-15
CHAPTER 6. TROUBLESHOOTING TABLE
[1]
TROUBLESHOOTING TABLE
......................
6-1
[2]
LED flashing specification at the time of an
error (Center icon LED used)
......................
6-14
CHAPTER 7. MAJOR IC INFORMATIONS
[1]
MAJOR IC INFORMATIONS
.........................
7-1
CHAPTER 8. OVERALL WIRING/SYSTEM BLOCK
DIAGRAM
[1]
OVERALL WIRING DIAGRAM
......................
8-1
[2]
SYSTEM BLOCK DIAGRAM
.........................
8-2
Parts Guide
CONTENTS
No. S30E840LE810U
LCD COLOR TELEVISION
LC-40LE810UN
LC-46LE810UN
LC-52LE810UN
LC-60LE810UN
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
LC-40/46/52/60LE810UN (1st Edition)
MODELS