Sharp LC-60LE810UN Service Manual - Page 72

LC-40/46/52/60LE810UN (1st Edition) 4. Monitor ERR STBY table Outline: Location: Communication/Power failure detected by the monitor microcomputer is stored on EEPROM, and the last 4 abnormal states can be confirmed in the process mode A. Page 1 of the process mode A: MONITOR ERR CAUSE "0" if there is no error. It is cleared to 0 on the last page of the process mode A. Display 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 11 16 1A 1D 1E 1F 21 23 Start-up communication error 2 Start-up communication error 3 Start-up communication error 4 Start-up communication error 5 Start-up communication error 6 Start-up communication error 7 Start-up communication error 8 Start-up communication error 9 Communication error A Communication error B Communication error C Communication error D Communication error E Communication error F Communication error H Panel-related error Other error 2 Power supply error 1 Power supply error 2 Power supply error 3 Power supply error 5 Other error 3 Error description Initial communication from the main CPU is not received. Only the initial communication is received. Until panel information request reception Until initialization completion reception Until version notification transmission Until start-up information notification transmission Until start-up information response reception Until time-out setting reception REQ time-out Restart time-out during the beginning of time acquisition start-up Ending sequence time-out Preset start-up time-out during completion download, start-up time-out Time acquisition time-out Regular communication time-out Lamp failure Monitor temperature failure PS_ON (AC_DET) failure D_POW (DET_13V) failure D_POW (DET_D3V3) failure Panel power failure Error standby request from the main CPU 6 - 18