Sharp LC-60LE810UN Service Manual - Page 53

10)INPUT MODE FIXED LC-40/46/52/60LE810UN (1st Edition) Selection Default Explanation Limit in Setting Exception Remarks Selection between "Variable", "Fixed", "ACON (AC CTRL)" and "AC/RCON (AC/RC CTRL)" (loop provided) - (Variable) • At the "Fixed" setting, the TV set gets started with the settings of "Input mode start", and then any other channels and inputs are not accepted. • At the "ACON (AC CTRL)" setting, the TV set gets started with the settings of "Input mode start" under AC control. • At the "AC/RCON (AC/RC CTRL)" setting, the TV set gets started with the settings of "Input mode start" under either control. • With the execution of hotel mode, the input source is forced to change to that set by "Input mode start" and the channel switching and input switching are prohibited thereafter. • ON-timer's (Wake-up timer) channel items are not displayed or the operation is prohibited. (Basically, they are not displayed.) • The following keys are invalidated. CH / , direct tuning button, FLASHBACK, input However, the keys (input switching and CH / keys) of the unit for menu operation remain valid. None • In the following case, setting is cancelled and mode is changed to "Variable". When the setting of "Input mode start" is set to "Normal". 11)RC_PATH_THROUGH Selection Default Explanation Limit in Setting Exception Remarks Selection between "OFF", "ON: TV RCE" and "ON: TV RCD" (loop provided) OFF Function to feed the remote controller-received signal to Pin 9 (open) on the RS232C. None None None 12)AV POSITION FIXED Selection Default Explanation Limit in Setting Exception Remarks Selection between "Variable" and "Fixed" (loop provided) Variable In case of "Fixed" setting, - Menu "Picture" and "Audio" setting can't be changed like "Dynamic (Fixed)". - When "AV Mode" key is pressed, TV just displays current AV Mode (cannot be changed.). None None • When receiving with AV Position key, OPC, Dolby key and other direct audio select keys, the current display stays on and no setting can be changed. • Even by initializing personal information, the hotel-mode settings are kept intact. In this way, the AV positions, video and audio adjustment settings are not initialized. 13)LOUD SPEAKER (ON/OFF) Selection Default Explanation Limit in Setting Exception Remarks Selection between "ON" and "OFF" (loop provided) ON If "OFF" is selected, TV stops Speaker output even without Headphone connected. None None • Press the volume UP/DOWN key, and the mute icon appears for 4 seconds. • The mute key and audio-related keys are displayed with caution. • Usually, the headphones and monitor audio outputs can be adjustable. 14)232C POWON Selection Default Explanation Limit in Setting Exception Remarks Selection between "Disable" and "Enable" (loop provided) Disable In the standby mode, the power-on by the 232C command is enabled or disabled. None None None 5 - 19