Sharp MX-B350P MX-B350P MX-B450P Software Setup Guide - Page 10

Table of contents  Windows / Select the software to be installed  Installing the printer driver / PC-Fax driver (common procedure)  Custom installation  Search for the machine and install the driver 1 When you are asked how the printer is connected, select [Search for MFP] and click the [Next] button. Refer to "Custom installation (page 7)" on how to display the custom installation screen. 2 Select the search method. Select the name of this machine (host name) or IP address, then click the [Next] button. 3 When the model selection window appears, select the model name of your machine and click the [Next] button. You can also click the [Specify Condition] button and search for the machine by entering the machine's name (host name) or IP address, or selecting the search period. • Configure port settings if needed. (Normally no changes are needed.) • If you will use the tandem print function*, select [Yes]. (Printer driver only) * Some models may not be able to use Tandem Print. 4 Follow the instructions on the screen and proceed with installation. For detailed procedures, refer to Step 4 onwards of "Installation by specifying the machine's address (page 8)". 5 This completes the installation. Related topics • Windows / Select the software to be installed (P. 3) • Enable options and peripherals (P. 14) Troubleshooting • The software cannot be installed (P. 22) • How to check the IP address of this machine* (P. 22) 6 10