Sharp PN-E471 PN-E421 PN-E471 Operation Manual

Sharp PN-E471 Manual

Get Sharp PN-E471 PDF manuals and user guides
UPC - 074000046955
View all Sharp PN-E471 manuals
Add to My Manuals
Save this manual to your list of manuals

Sharp PN-E471 manual content summary:

  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 1
    PN-E471 PN-E421 LCD MONITOR OPERATION GUIDE
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 2
    procedure 18 Setting of the GAMMA user data 21 RS-232C command table 22 Controlling the Monitor with a PC (LAN 29 Settings to connect to a LAN 29 Controlling with a PC 31 Troubleshooting 37 Specifications 38 This guide contains instructions regarding operation, settings, and similar details
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 3
    view 1 Part Names 1. LCD panel 2. Remote control sensor 3. Input switch (See page 5.) 4. Power switch 5. Power LED TIPS • Use a pointed object such as a pen tip to press the switches at the front of the monitor. 2 345 nRear view 12 14 13 1 2 10 34 11 567 9 When the PN-ZB01 (optional) 8 is
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 4
    POWER button 3. DISPLAY button (See page 5.) 4. MUTE button (See page 5.) 5. VOL +/- buttons (See page 5.) BRIGHT +/- buttons (See page 5.) Cursor control ( / / / ) buttons 6. INPUT button (See page 5.) 7. MODE button (See page 5.) 8. SIZE button (See page 5.) 9. MENU button (See page 5.) E4
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 5
    not press any buttons for about 4 seconds, the BRIGHT menu automatically disappears. 2. DISPLAY Displays monitor information. When you press this button again, the display disappears. When the PN-ZB01 (optional) is attached, the display changes from INFORMATION1 → INFORMATION2 → clear display, and
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 6
    the connected PC as the corresponding dots on the screen. * Displays the dots of the input signals as the corresponding dots on the screen. *: With a monitor of screen resolution 1600 x 1200 or 1920 x 1200, selecting Dot by Dot displays the NORMAL screen. TIPS • Using this
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 7
    SETUP BLACK LEVEL 84 OPTION TINT 30 ENLARGE COLORS 30 PIP/PbyP SHARPNESS 12 1920x1080 V: 60 Hz H: 67.5 kHz PC D-SUB OK···[MENU ) 4 Screen resolution of input signal, and other data. TIPS • Items that cannot be selected appear in gray. (e.g. Function not supported by the current
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 8
    CONTRAST G-CONTRAST B-CONTRAST COPY TO USER GAMMA RESET TREBLE BASS BALANCE RESET OSD H-POSITION OSD V-POSITION MONITOR (for PN-E421 only) MONAURAL AUDIO LANGUAGE POWER ON DELAY STANDBY MODE HDMI SETTING HDMI AUTO VIEW HDMI RGB INPUT RANGE HOT PLUG CONTROL HDMI DVI RS-232C/LAN
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 9
    BLEND PIP SOURCE SOUND CHANGE MAIN POS PbyP2 POS AUTO OFF TIPS • Some items may not be displayed depending on the input mode. Menu Items PN-ZB01 (optional) Not attached Attached
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 10
    . COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. ADVANCED (AV input) You can adjust more specifically. (See page 16.) COLOR MODE Changes the color mode on the screen. The color mode on the screen can also be changed using a remote control unit. (See page 5.) * sRGB
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 11
    MONITOR (for PN-E421 only) Select the installation direction of the monitor the monitor is while the monitor is and control via LAN size control signal CONTROL Sets whether to use hot plug control control the monitor from the computer. ID No. SET Assigns ID numbers to monitors control the monitor from
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 12
    You can set the time to switch the monitor on and off. INPUT SELECT Select the is automatically adjusted when its resolution is 800 x 600 or this case select OFF. (Perform manual adjustment of the screen.) AUTO PC D-SUB, PC HDMI and AV HDMI When the PN-ZB01 (optional) is attached: PC DVI-D, PC
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 13
    signals for the sub screen are input in PIP, PbyP, or PbyP2 mode. MANUAL....... Displays a main screen and a black sub screen. AUTO Displays the main screen TO USER, and GAMMA • If GAMMA is set to USER, the following items cannot be set. WHITE BALANCE, PRESET, R-/G-/B-CONTRAST, and COPY TO USER •
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 14
    the black band, is one of the resolutions listed above. *2: U se the automatic screen adjustment. 2 (1,2) (2,2) (3,2) (4,2) (5,2) 3 (1,3) (2,3) (3,3) (4,3) (5,3) 4 (1,4) (2,4) (3,4) (4,4) (5,4) 5 (1,5) (2,5) (3,5) (4,5) (5,5) In vertical orientation (for PN-E421 only) ENLARGE
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 15
    . 3. Press . SCHEDULE becomes effective. (1) ●: SCHEDULE effective -: SCHEDULE not effective (2) POWER ON : Switches the monitor on at the specified time. OFF : Switches the monitor off at the specified time and puts the monitor in standby mode. (3) DAY OF THE WEEK Specifies the day of the week to
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 16
    FLESH TONE Adjust the hue control. 3D-NR Reduce the VIDEO) Specify whether to perform 3-dimension Y/C separation. If dot interference will appear. Adjust the screen automatically or manually. 4. When adjustment is finished, press the specifications of the input signal and is not a malfunction.) E 16
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 17
    SERVICE & SUPPORT, and SNMP (See page 11, and pages 33 to 36.) ADJUSTMENT LOCK You can disable operations on the monitor and the remote control , leave this setting as MONITOR. When using an optional part, if instruction appears, change the setting accordingly. CONTROLLER INPUT Normally, you do
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 18
    monitor (see page 19), you can make input mode selection/adjustment or can check the status of a specific monitor. Precautions when the PN-ZB01 (optional) is attached • To control the monitor with spaces (" ") if necessary. (" " is a return code (0DH, 0AH or 0DH)) Wrong : VOLM30 Right : VOLM
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 19
    L OCKE D Return code (0DH, 0AH) When RS-232C/LAN SELECT is set to LAN UNSE L ECTED Return code (0DH, 0AH) monitor (see page 11). This allows you to control a particular monitor in a daisy chain of monitors. You can assign ID numbers either from the menu screen (using the remote control
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 20
    (Parameter has no meaning.) Returned response. The ID ID : 001 IDLK : 002 ← number is also displayed on the monitor screen. IDCK000 + ← Repeater control. (If a command is used with repeater control, ID WAIT designation using IDSL or IDLK ID : 001 IDLK : 000 is canceled.) ID : 002 IDLK : 000
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 21
    : VOLM030 + ← Sets volume of all monitors to 30. In repeater control, responses are returned by all the connected monitors. If you want to determine that a value has been returned by a specific set, assign ID numbers to each monitor in advance. When some monitors do not return their responses, the
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 22
    longest direction Position of VSIZ WR the shortest direction Longest direction resolution HRES WR Shortest direction resolution VRES WR ARST W Parameter 1 0-1200 0-63 0-100 0-100 0-100 0-100 300-1920 200-1200 1 Reply Control/Response contents When the input mode is PC D-SUB, PC RGB
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 23
    Controlling the Monitor with a PC (RS-232C) PICTURE menu Function Auto CONTRAST BLACK LEVEL TINT COLORS SHARPNESS 0-1 -10-10 1 -10-10 2 -10-10 3 0 2 3 0 1-17 COPY TO USER GAMMA USER R-CONTRAST G-CONTRAST B-CONTRAST RESET AUDIO menu Function TREBLE BASS BALANCE RESET CRTR WR CRTG WR CRTB WR
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 24
    OSD H-POSITION OSD V-POSITION MONITOR (for PN-E421 only) MONAURAL AUDIO LANGUAGE Command Direction OSDH WR OSDV WR STDR WR MONO WR LANG WR Power On Delay PWOD WR STANDBY MODE STBM WR HDMI SETTING HDMI AUTO VIEW HDAW WR HDMI RGB INPUT HDRA WR RANGE HOT PLUG CONTROL (DVI) HPCT WR HOT
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 25
    Controlling the Monitor with a PC (RS-232C) OPTION menu Function Date/time setting SCHEDULE INPUT SELECT AUDIO SELECT DVI BNC HDMI PC DVI-D PC D-SUB PC HDMI PC RGB AV DVI-D AV HDMI INPUT RESOLUTION (PC) AV COMPONENT AV S-VIDEO AV VIDEO RESOLUTION CHECK PIXEL SETTING (PC D-SUB, PC RGB) INPUT
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 26
    Control/Response contents 0-4 11-55 0-100 0: OFF, 1: 2 x 2, 2: 3 x 3, 3: 4 x 4, 4: 5 x 5 1 x 1 (OFF) to 5 x 5 ("m x n" is expressed as "mn", where m and n are the numbers of monitors 15 16 17 18 19 20 21 22 23 24 In vertical orientation (for PN-E421 only) 2 x 2 3 x 3 2 0 6 3 0 3
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 27
    POS2 0-2 0: POS1, 1: POS2, 2: POS3 0-1 0: MANUAL, 1: AUTO Initialization/Functional Restriction Setting (FUNCTION) menu Function ALL 2: LED 0-2 0: OFF, 1: OSD & LED, 2: LED 0-1 0: MONITOR, 1: CONTROLLER 0-2 0: D-SUB, 1: HDMI ("ERR" when MONITOR is selected for POWER BUTTON.) 2: DVI-D ("ERR" when
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 28
    READ BLUE GAMMA DATA READ USER DATA INITIALIZE USER DATA SAVE Command Direction Parameter Reply Control/Response contents UGRW W UGGW of user data cc: Checksum (ASCII data) of the block number and user data xxxx: User data of 32 pieces Initialize the user data. Save the user data in the monitor.
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 29
    PN-ZB01 (optional) is attached, your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. You can also configure the monitor to send e-mail notification when it has a problem change this setting to ON. To set the address manually, set this to OFF. IP ADDRESS If the DHCP
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 30
    Internet Explorer. Controlling the monitor 1. Turn the power ON to the monitor. 2. Set RS-232C/LAN SELECT on the SETUP menu to LAN. PC operation 3. Launch Internet Explorer, in the "Address" box type "http://192.168.150.2/" and press the Enter key. You will be prompted to enter a user name and
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 31
    Error" will appear. Wait for a moment before operating your monitor again. • You cannot operate the monitor while it is warming up. • If "DHCP CLIENT" is set to "ON", press on the remote control unit two times and then check the monitor's IP address. Caution • Wait 10 seconds after clicking [OK
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 32
    See page 13.) • FUNCTION (See page 17.) ■ CONTROL You can control the operations corresponding to the buttons ( ) on the remote control unit. (See page 5.) TIPS • In standby mode, Power ON is the operation available. • MONITOR POWER turns the monitor power ON/ OFF regardless of the POWER BUTTON
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 33
    to restrict access to this monitor. After entering a user name and password, click [Apply]. ACCEPT IP ADDRESS You can limit access to this monitor by registering IP addresses of PCs that should have access. To limit access, specify the option "From only specific IP addresses". Otherwise, to allow
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 34
    Controlling the Monitor with a PC (LAN) ■ NETWORK (GENERAL) This screen allows you to specify the general LAN settings. ■ MAIL (ORIGINATOR) This screen allows you to configure the e-mail sent periodically or when the monitor has an error. The settings depend on the configuration of your LAN. Ask
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 35
    Controlling the Monitor with a PC (LAN) ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. ■ MAIL (PERIODICAL) When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail.
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 36
    letters and symbols can be used for the community name, user name and password. ■ SERVICE & SUPPORT (URL INFORMATION) You can display a specific URL in the URL INFORMATION field on the INFORMATION screen when an error occurs in the monitor. (See page 32.) SNMP SETTING Set whether to enable or
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 37
    If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? • Is the main power switch off? • Is the monitor in standby mode (the power LED illuminating
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 38
    Specifications nProduct Specifications Model PN-E471 PN-E421 LCD component 47" Class [46-15/16 inch (119.3cm) 42" Class [42-1/16 inch (106.7cm) diagonal] TFT LCD diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 1.06 billion colors Pixel pitch 0.542 mm (H) × 0.
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 39
    PN-E471] 38-1/16 [967] 4-3/8 [111] 2-11/16 [69] 42-5/8 [1083] Opening width (41-1/16 [1043]) 1-7/16 [37] Specifications 4 times or more the weight of the monitor. [PN-E421] 4-15/16 [126] monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 40
    value: PN-E421. *2 When PN-ZB01 (optional) is not connected. *3 When AUTO INPUT CHANGE is set to OFF. DMPM: Digital Monitor Power Management DMPM Monitor ON Active OFF Screen Display No display Power consumption*1 260 W*2 225 W*2 2 W*2*3 2 W*2*3 nDDC (plug and play) The monitor supports the
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 41
    Specifications nCompatible signal timing (PC) Screen resolution VESA 640 × 480 800 × 600 848 × 480 1024 × 768 1152 Yes Yes Yes Yes Yes Yes Yes Yes *1 Displays a reduced image. *2 Available when the PN-ZB01 (optional) is attached. * All are compliant only with non-interlaced. * Depending on
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 42
    Specifications nPC/AV DVI-D input terminal pins (DVI-D 24 pin) nPC/AV HDMI input terminal pins (HDMITM Connector) No. Function clock shield 23 TMDS clock+ 24 TMDS clock- No. Function 1 N.C. 2 Received data 3 Transmitted data 4 N.C. 5 GND No. 6 N.C. 7 N.C. 8 N.C. 9 N.C. Function E 42
  • Sharp PN-E471 | PN-E421 | PN-E471 Operation Manual - Page 43
    PN-E471E421 G EN10B(2)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
PN-E471
PN-E421
LCD MONITOR
OPERATION GUIDE