Sharp PN-E471 PN-E421 PN-E471 Operation Manual - Page 24

Controlling the Monitor with a PC (RS-232C) SETUP menu Function OSD H-POSITION OSD V-POSITION MONITOR (for PN-E421 only) MONAURAL AUDIO LANGUAGE Command Direction OSDH WR OSDV WR STDR WR MONO WR LANG WR Power On Delay PWOD WR STANDBY MODE STBM WR HDMI SETTING HDMI AUTO VIEW HDAW WR HDMI RGB INPUT HDRA WR RANGE HOT PLUG CONTROL (DVI) HPCT WR HOT PLUG CONTROL (HDMI) HPCH WR RS-232C/LAN SELECT CTLS WR ID NUMBER ID NO. SETTING IDST W R ID NO. SETTING IDSL W (ONCE) ID NO. SETTING IDLK W (SUBSEQUENT) ID CHECK BAUD RATE SPEAKER SELECT OPTION DC OUT SETTING IDCK W BAUD WR SPSL WR DCOT WR Parameter 0-100 0-100 0-1 0-1 14 1 2 3 4 5 6 0 1-60 0-1 0-1 0-2 Reply Control/Response contents 0-100 0-100 0-1 0-1 14 1 2 3 4 5 6 0 1-60 0-1 0-1 0-2 0: LANDSCAPE, 1: PORTRAIT 0: OFF, 1: ON ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL OFF ON 0: STANDARD, 1: LOW POWER ("ERR" when SCHEDULE is effective or OFF is selected for LED.) 0: OFF, 1: ON 0: AUTO, 1: FULL, 2: LIMITED *2 *1 (A) (B) ○ ○ ○ ○ ○○ ○ ○ ○ 0-1 0-1 0-1 0-255 1-255 0 1-255 0 0 0-2 0-1 0-2 ID IDLK 0-1 0-1 0-1 0-255 : xxx : yyy 0-2 0-1 0-2 0: OFF, 1: ON 0: OFF, 1: ON 0 : RS-232C 1 : LAN Sets the monitor's ID number. ("0" means "no ID number".) Returns the monitor's ID number. Sets a monitor ID number. This ID number is only effective for the command immediately after this command. Clears the ID number if one has been designated. Sets a monitor ID number. This ID number is effective for the next and all subsequent commands after this command. Clears the ID number if one has been designated. Displays monitor's own ID number and the selected ID number on the screen. 0: 9600bps, 1: 19200bps, 2: 38400bps 0: Internal speaker, 1: External speaker 0: OFF, 1: MODE1, 2: MODE2 ○○○ E 24