Sharp PN-E471 PN-E421 PN-E471 Operation Manual - Page 39
Dimensional Drawings, PN-E471] - weight
UPC - 074000046955
View all Sharp PN-E471 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
nDimensional Drawings Note that the values shown are approximate values. [PN-E471] 38-1/16 [967] 4-3/8 [111] 2-11/16 [69] 42-5/8 [1083] Opening width (41-1/16 [1043]) 1-7/16 [37] Specifications Unit: inch [mm] VESA holes * 7-7/8 [200] 7-7/8 [200] 3-15/16 3-15/16 [100] [100] 7-7/8 [200] 24-3/4 [628] Opening height (23-1/8 [588]) When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends using M6 screws and tighten the screws. Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious personal injuries as well as damage to the product. The screw and hole should come together with over 5/16 inch (8 mm) length of thread. Use a bracket which has been approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor. [PN-E421] 4-15/16 [126] 2-5/8 [66] 33-9/16 [852] 38-5/16 [973] Opening width (36-3/4 [934]) 1-1/2 [38] VESA holes * 7-7/8 [200] 7-7/8 [200] 3-15/16 3-15/16 [100] [100] Unit: inch [mm] 7-7/8 [200] 22-5/16 [566] Opening height (20-3/4 [527]) When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends using M6 screws and tighten the screws. Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious personal injuries as well as damage to the product. The screw and hole should come together with over 5/16 inch (8 mm) length of thread. Use a bracket which has been approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor. 39 E