Sharp TL-M4600 TL-M4600 , TL-M5200 Operation Manual - Page 23
Connecting the Power Cord, Binding Cables - warranty
UPC - 074000365643
View all Sharp TL-M4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Preparation Connecting the Power Cord Caution • Do not use a power cord other than the one supplied with the monitor. Be sure to use a power outlet of AC 120 V (60 Hz). Using power supply other than the one specified may cause fire. 1 Plug the power cord (supplied) into the AC input terminal. • Place the monitor close to the AC outlet, and keep the power plug within reach. • This product must only be connected to an AC 120 V, 60 Hz, grounded (3-prong) outlet. Connecting it to any other kind of outlet will damage the product and invalidate the warranty. 2 Plug the power cord (supplied) into the AC power outlet. 1 Fastened part Binding Cables n Attaching the cable clamp The cables connected to the terminals on the back of the monitor can be neatly bundled using the supplied cable clamp as shown in the illustration. 2 Band Power cord clamp 3 Hole for the power cord clamp Note • A cable clamp cannot be easily removed once it is attached. n Fastening the power cord The power cord can be fastened using the supplied power cord clamp. This will prevent the power cord from being disconnected accidentally. 1 Attach the supplied power cord clamp to the power cord, making sure the power cord clamp is circular hole-side down. 2 Insert the tip of the band into the hole for the power cord clamp. 3 While holding the tail of the band, slide the fastened part toward the AC input terminal. 21