Sharp TL-M4600 TL-M4600 , TL-M5200 Operation Manual - Page 29

Operation Operating with the Remote Control FREEZE button MAGNIFY buttons Displaying an enlarged portion of an image Graphs, tables and other portions of images can be enlarged. This is helpful when providing more detailed explanations. AUTO SYNC button RETURN button AV MODE button Auto Sync adjustment (Auto Sync) "Clock", "Phase", "H-Position", and "V-Position" are automatically adjusted. Press AUTO SYNC. • You can also perform Auto Sync adjustment from the "Setup" menu. 1 Press MAGNIFY. • Enlarges the image. • Pressing or MAGNIFY enlarges or reduces the image. Note Press . ×1 ×2 ×3 ×4 ×9 ×16 ×36 Press . • You can change the location of the enlarged image using 2 Press RETURN to cancel the operation. • The magnification then returns to ×1. Freezing a moving image 1 Press FREEZE. • The image is frozen. 2 Press FREEZE again to return to the moving image from the currently connected device. Note • The still image automatically goes out after 30 minutes. Selecting AV mode You can select the appropriate mode for the image, such as movie or video game. Press AV MODE. • When pressing AV MODE, the AV mode changes in the following order: Standard Presentation Movie Game sRGB Note • The selectable magnifications differ depending on the input signal. • In the following cases, the image will return to the normal size (×1). - When switching the input mode. - When RETURN has been pressed. - When the input signal is changed. - When the input signal resolution and refresh rate (vertical frequency) change. - When the Resize mode is changed. Note • See page 32 for details on AV mode. • "sRGB" is displayed only when RGB signal is input. 27