Sharp TL-M4600 TL-M4600 , TL-M5200 Operation Manual - Page 25

Operation Turning the Monitor On/Off Turning on the power Press POWER on the monitor. • POWER indicator (Green): The monitor is on. • After turning the power "ON" by pressing POWER on the monitor, you can turn the power ON by pressing ON on the remote control. Turning off the power STANDBY button ON button POWER button POWER indicator Press STANDBY on the remote control. • The monitor enters standby mode. • The POWER indicator on the monitor changes from green to red. Press POWER on the monitor. • The POWER indicator on the monitor turns off. • When the monitor is turned off by POWER on the monitor, you cannot turn on the power by pressing ON on the remote control. POWER indicator Lighting (Green) Power ON Lighting (Red) Standby Lights off Power OFF Flashing When "Power On Delay" function (Orange) is activated. Flashing Input signal standby (when (Green) "Power Management" is set to "Mode2" in the Power Control menu.) Note • If you are not going to use this monitor for a long period of time, be sure to remove the power cord from the AC outlet. • Minor power is consumed when the unit is in standby mode. Caution • When switching the POWER, ON or STANDBY buttons off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction. 23