Sharp TL-M4600 TL-M4600 , TL-M5200 Operation Manual - Page 36

Menu operations Audio menu Audio Standard Treble [ 0] - Bass [ 0] - Balance [ 0] L Reset Power Control + + R n Audio adjustment You can adjust the audio of the selected AV mode. Selectable items ◄button ►button Treble Bass Balance For weaker treble For weaker bass Decrease audio from the right speaker For stronger treble For stronger bass Decrease audio from the left speaker Note • For resetting all adjustment items to the factory preset values, press ▲/▼ to select "Reset", press ENTER, press ▲/▼ to select "Yes", and then press ENTER. Power Control menu Power Control Power Management No Operation Off Ecology n Power Management You can set the monitor to automatically power off when there is no image displayed on the computer. Selectable items Description Off • No power management • Factory preset value. Mode1 • If no signal inputs for approximately 8 minutes, the power shuts down. • Even if you start using the computer and the signal inputs again, the monitor stays off. • The monitor turns on again by pressing ON on the remote control. Mode2 • If no signal inputs for approximately 8 seconds, the power shuts down. • When you start using the computer and the signal inputs again, the monitor turns on. Note • If you turn off the power by disconnecting the power cord when setting "Mode2" in power management, the monitor may not function properly after turning the power on again. In such case, press ON on the remote control. • Pressing POWER on the monitor will have the same result. n Auto power-off when there are no operations performed (No Operation Off) You can set the monitor to automatically power off when no operation is performed for more than 30 minutes or 3 hours. Note • "Disable" is the factory preset value. 34