Sharp TL-M4600 TL-M4600 , TL-M5200 Operation Manual - Page 37
Setup menu, Ecology, Setting a password, Password, Menu operations
UPC - 074000365643
View all Sharp TL-M4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Menu operations n Ecology When set to "Yes", The monitor activates the following power saving mode. • "OPC" set to "On" (Page 33) • "Standby Mode" set to "Mode2" (Page 38) • "No Operation Off" set to "3 Hours" (Page 34) • "Power Management" set to "Mode1" (Page 34) Note • Ecology mode cannot be deactivated by selecting "No". Each setting must be changed individually to deactivate Ecology mode. Setup menu Setup Password Keylock Set Inputs Input Label Position Fine Sync Standby Mode Auto Restart RS-3C DHCP Client TCP/IP Status All Reset Option n Setting a password (Password) If you do not want others to change the setting for the "Setup" menu, set a password. 1 Select "Password", then press ENTER. • The screen for entering the password appears. MENU [Setup---Password] Operation Enter your new password. Use 4 digits. Old Password New Password Reconfirm ------ ---- 2 Press ▲/▼ to set the first digit in "New Password", then press ►. 3 Enter the remaining 3 digits, then press ENTER. • To return to the previous digit, press ◄. 4 Enter the same password in "Reconfirm", then press ENTER. • The status for "Password" changes to " (enable)". Note • Once the password is set, you must enter the password to change the "Setup" menu settings. 35