Sharp TL-M4600 TL-M4600 , TL-M5200 Operation Manual - Page 46
Multi Screen, Power On Delay, Selecting the background image, Background, Menu operations, Selectable
UPC - 074000365643
View all Sharp TL-M4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Menu operations n Multi Screen You can align 2, 3, 4, 9, or 16 monitors and integrate them into a single large screen to display. Enlarged views of separated images are displayed in each monitor. Selectable items Description Status Sets the number of screen splits used for the enlargement. Position Specify the split screen to be displayed when this function is used. H-Bezel Sets the frame width of the display V-Bezel when this function is used. H-Position Adjust the horizontal position of the enlarged screen. V-Position Adjust the vertical position of the enlarged screen. Reset Resets all adjustment items to factory preset values. Original image 2 monitors (2x1) 1−1 2−1 3 monitors (3x1) 1−1 2−1 3−1 4 monitors (4x1) 1−1 2−1 3−1 4−1 4 monitors (2x2) 1−1 2−1 1−2 2−2 9 monitors (3x3) 1−1 2−1 3−1 1−2 2−2 3−2 1−3 2−3 3−3 16 monitors (4x4) 1−1 2−1 3−1 4−1 1−2 2−2 3−2 4−2 1−3 2−3 3−3 4−3 1−4 2−4 3−4 4−4 Note • The availability of Multi Screen modes depending on the video signal is as follows. Input Video Mode Signal S-VIDEO NTSC VIDEO PAL SECAM Computer1 480I Computer2 576I 3x1 4x1 3x3 4x4 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A: Not Available • "Status" and "Position" may not be selected depending on the input signal. • Depending on the number of monitors and/or the input signal, a distributor for the input signal (commercially available) is required. For details, refer to the "SETUP MANUAL". n Power On Delay You can delay the screen display after the monitor is turned on. The period can be set up to 100 seconds in units of 1 second. When this function is activated, the POWER indicator flashes (at approx. 1 second interval) in orange. This function is disabled when 0 is specified. n LED Specifies whether to light the indicators (POWER, TIMER, and OPC). Selectable items Description On According to the setting, the indicators light up. Off The indicators do not light up. Note • Even if "LED" is set to "Off", the POWER indicator lights red in standby mode. • When backlight and/or temperature problems occur, the TIMER indicator flashes red, even if "LED" is set to "Off". n Selecting the background image (Background) Selectable items Blue None Description Blue screen Black screen 44