Singer 3116 Simple Instruction Manual - Page 81
Monogramming and embroidering with, embroidery hoop
View all Singer 3116 Simple manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
ab a b GBGBMonogramming and embroidering with embroidery hoop* Drop the feed dogs. (Note: Stitch length cannot be controlled with dial) - Set the machine as illustrated above. - Remove the presser foot and the presser foot holder. - Lower presser foot lever before starting to sew. - Adjust the stitch width according to the size of lettering or design. Preparation for Monogramming and Embroidering* - Draw the desired lettering or design on the right side of the fabric. - Stretch the fabric between embroidery hoop as firmly as possible. - Place the fabric under the needle. Make sure the presser foot bar is down in its lowest position. - Turn the balance wheel towards you to bring up the lower thread through the fabric. Sew a few securing stitches at the starting point. - Hold the hoop with thumb and forefingers of both hands. - Coordinate sewing speed and movement of hoop. 74