Singer S10 I STUDIO Instruction Manual 2 - Page 58
Preparation For Embroidery Sewing
View all Singer S10 I STUDIO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
3. PREPARATION FOR EMBROIDERY SEWING BEFORE ATTACHING EMBROIDERY UNIT ATTACHING EMBROIDERY FOOT Always be sure to turn off power to machine CAUTION before changing presser foot. * Raise presser foot lifter. * Turn hand wheel toward you until needle is in its highest position. 1. Remove presser foot screw, presser foot and foot holder. 2. Attach the embroidery presser foot behind presser bar so that the drive lever is above the needle clamp. Secure it by tightening presser foot screw. 3. Turn hand wheel toward you to move needle up and down, and check that the embroidery presser foot moves up and down together with the needle. Foot holder Support du pied Sujetador prensatelas Screw Vis Guia Presser foot Pied de biche zigzag Pie prensatelas Presser bar Barre de pied presseur Barra de prensatelas Drive lever Levier d'entraînement Palanca de accionamiento Be careful not to touch the needle when CAUTION replacing presser foot. INSERTING THE BOBBIN Refer to page 16 - 17. * A large amount of thread is required for embroidering, so be sure to use full bobbin. Needle clamp Serre-aiguille Abrazadera de aguja Embroidery presser foot Pied presseur de broderie Prensatelas de bordado 58