Singer S10 I STUDIO Instruction Manual 2 - Page 78

Skipped Stitches And Thread, Breakages Occur

Get Singer S10 I STUDIO PDF manuals and user guides View all Singer S10 I STUDIO manuals
Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

TROUBLESHOOTING SKIPPED STITCHES AND THREAD BREAKAGES OCCUR Needle tip is broken. Thread path is incorrect. Replace needle. Refer to pages 18 - 21. Needle is bent. Replace needle. Needle is not installed correctly. Install the needle correctly. Refer to pages 96 - 97. Upper thread tension is too tight. Adjust the thread tension. Refer to pages 92 - 93. To check the elasticity of the thread, hold a length of thread of about 6 inches at both ends and pull it, check the length at which it breaks. If using a highly-elastic thread, reduce the upper thread tension. 78 Thread is tangled around spool holder. Refer to pages 12 - 13. Thread or fabric bits have collected under the needle plate. Remove the thread or fabric bits. Refer to pages 100 - 101. A thin needle is being used for heavy material. Replace with a thicker needle. Generally, at least a #14 needle should be used.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
´¶
TROUBLESHOOTING
SKIPPED STITCHES AND THREAD
BREAKAGES OCCUR
Needle tip is broken.
Replace needle.
Needle is bent.
Replace needle.
Needle is not installed
correctly.
Install the needle correctly.
Refer to pages 96 - 97.
Upper thread tension is
too tight.
Adjust the thread tension.
Refer to pages 92 - 93.
To check the elasticity
of the thread, hold a
length of thread of about
6 inches at both ends
and pull it, check the
length at which it breaks.
If using a highly-elastic
thread, reduce the upper
thread tension.
Thread path is
incorrect.
Refer to pages 18 - 21.
Thread is tangled
around spool holder.
Thread or fabric bits
have collected under
the needle plate.
Remove the thread
or fabric bits. Refer to
pages 100 - 101.
A thin needle is
being used for heavy
material.
Replace with a thicker
needle. Generally, at
least a #14 needle
should be used.
Refer to pages 12 - 13.