Sony BVME171 Operation Guide - Page 18
Connecting the HDMI cable
View all Sony BVME171 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
2 Connect to the network by using a 10BASE-T/ 100BASE-TX cable (shielded-type, sold separately). Note We recommend to use an optional switching hub with auto selection function (AUTO MDI/MDI-X) of a straight/cross cable. 3 Connect the output cable on the AC adaptor supplied with the controller to the DC 12V connector of the controller. Note When multiple units are connected, set for the LAN before setting the NETWORK switch to LAN (page 22). 4 Set the NETWORK switches of each monitor and the controller to LAN. Connecting the HDMI cable 1 Remove the two screws on both sides of the HDMI IN connector. 2 Attach the HDMI cable holder (supplied) with the removed screws. HDMI cable holder (supplied) 3 Insert the HDMI cable and fix with a commercially- available cable fixer (1 piece). Cable fixer HDMI cable 18 Connecting the HDMI cable