Sony BVME171 Operation Guide - Page 22
Setting for the LAN to Connect Multiple Units
View all Sony BVME171 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Setting for the LAN to Connect Multiple Units You can control the multiple monitors using the controller (BKM-17R, sold separately) connected via each LAN (10/100) connector. You can also control a specific monitor or monitor group. Set an IP address to the monitors and controller and a monitor ID number and group ID number to each monitor. 1 Set the NETWORK switches of each monitor and the controller to PEER TO PEER. NETWORK switch: Set to PEER TO PEER. 4 Set the NETWORK switches of the monitor and the controller to LAN. NETWORK switch: Set to LAN. BKM-17R NETWORK switch: Set to LAN. BKM-17R NETWORK switch: Set to PEER TO PEER. 2 Set the different IP address to each monitor and the controller. Monitor: Set the IP address in the [Network Setting] menu (page 60) of the [System Configuration] menu. Controller: Set the IP address in the [Network Setting] menu (page 70) of the [Controller] menu. 3 Set [Monitor ID] and [Group ID] in the [Network Setting] menu (page 60) of the [System Configuration] menu. Set the different monitor ID number to each monitor and if necessary, group ID number. You can use the numbers 1 to 99 as a monitor ID number or group ID number. 22 Setting for the LAN to Connect Multiple Units