Sony BVME171 Operation Guide - Page 72
Assigning a Function to a Function Button, Audio Level Meter]
View all Sony BVME171 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Submenu Setting [Status]: Various status information regarding the monitor are displayed on a single page. For details on the display, see "Displaying the Monitor Status Page" (page 74). [Aperture]: When the function is set to on, the frequency response can be modified. The degree of modification is set in the [Aperture Value] menu (page 45) of the [Auxiliary Setting] menu. For information about the aperture modification frequency for each signal system, see "Aperture Modification Frequency" on page 93. [Mono]: When the button is set to on, a monochrome picture is displayed. When the button is set to off, the monitor switches automatically between color and monochrome mode depending on the color discrimination of the input adaptor. [Blue Only]: Red and green signals are cut, and only the blue signal is displayed as a monochrome picture. It makes it easy to adjust chroma and phase, and to check VTR noise. [R Off]: R (red) signals are cut respectively. [G Off]: G (green) signals are cut respectively. [B Off]: B (blue) signals are cut respectively. [Chroma Up]: The chroma setting increases by 12 dB. [Interlace]: Displays in the interlace mode. [Pixel Zoom]: The part of the picture is magnified up to 8 times (page 51). [Capture Load]: Displays the menu to load the captured picture from the USB memory, etc. [Marker]: All markers are displayed on the screen. [Aspect Marker]: An aspect marker is displayed on the screen. [Area Marker 1]: An area marker 1 is displayed on the screen. [Area Marker 2]: An area marker 2 is displayed on the screen. [Center Marker]: The center marker is displayed on the screen. [Aspect Marker-Line]: The line of the aspect marker is displayed on the screen. Submenu Setting [Aspect Blanking-Half]: Aspect Blanking is set to half blanking. [Aspect Blanking-Black]: The blanking level of Aspect Blanking is set to [0%] black level. [Side by Side]: The screen is displayed in the side by side display mode. [Wipe]: The screen is displayed in the wipe display mode. [Butterfly]: The screen is displayed in the butterfly display mode. [Blending]: The screen is displayed in the blending display mode. [Error Notify Clear]: Clears the notification detected in the gamut error detection. ([OSD Notification]) [Audio Level Meter]: The audio level meter is displayed. [ALM Hold Reset]: The peak hold of the audio level meter is canceled. [Time Code]: The time code is displayed. [Difference] 1): The difference between the luminance of the left 3D video signal and that of the right signal is displayed. [Checkerboard] 1): The left and right 3D video signals are displayed in a checkerboard pattern. [L/R Switch] 1): The left and right 3D video signals are displayed alternately by switching. [Horopter Check] 1): The left and right 3D video signals are displayed. [Flip H] 1): The 3D video signals are inverted horizontally and displayed. [Black Frame Insertion] 1): The signal is displayed in black frame insertion mode. [Black Detail Mode] 1): The signal is displayed in black detail mode. [Degauss] 1): The CRT is degaussed. [Flicker Free]: Displays without flicker. 1) Only function assigning is available with this monitor. Assigning a Function to a Function Button 1 Select the [Function Key] menu in the [Controller] menu. 2 Select the [F1] to [F16] button, and then the function assigned on each button. 72 Adjustment Using the Menus