Sony BVME171 Operation Guide - Page 69
Format], Name], InputX, Payload ID], Video Standard], Sampling Structure], Bit Depth], Picture Rate]
View all Sony BVME171 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Submenu [CH Status] Setting Displays the information on the used channels. The information of the internal signal assigned to the channel number is displayed on the channels 91 to 97. [CH]: Channel number [Inp]: Input connector number [Format]: Input signal format [Name]: Channel name For details on the assigned signal, see "Channel numbers 91 to 97 assignment" on page 27. Submenu [SDI Payload ID Status] Setting Displays the information of the Payload ID data superimposed on the SDI signal and current signal status of the monitor. When [Format] of the [Channel Configuration] menu is set to a setting other than [Composite] or [HDMI], the following is displayed. InputX: Input connector [Input1], [Input2], or [Input1&2] of the displayed information is displayed. [Payload ID]: XX XX XX XX (4byte data for Payload ID of the SMPTE-352M standard) Displays the 4-byte data in hexadecimal in sequence of Byte 1, Byte 2, Byte 3, and Byte 4. When the Payload ID information is not set, only [Current Status] is displayed and [---] is displayed for other items. When the following information is not decoded, [Unknown] is displayed. [Video Standard]: Decode display of Byte 1_Bit 6-0 (SD-SDI/HD-SDI/ 3G-SDI/Dual Link HD-SDI, etc.) [Sampling Structure]: Decode display of Byte 3_Bit 3-0 (4:2:2 Y/ Cb/Cr / 4:4:4 Y/Cb/Cr / 4:4:4 G/B/R, etc.) [Bit Depth]: Decode display of Byte 4_Bit 1-0 (8bit/10bit/12bit) [Picture Rate]: Decode display of Byte 2_Bit 3-0 (23.98/24/25/29.97/ 30/50/59.94/60) [Scanning Method]: Decode display of Byte 2_Bit 7/decode display of Byte 2_Bit 6 (Interlace/Progressive, Progressive/Progressive, etc.) [Link Number]: Decode display of Byte 4_Bit 7-6 (Single/Link_1 / Link_2 / Link_3 / Link_4) [Current Status]: Current status of the monitor [Format]: Displayed as "[Video Standard] + [Sampling Structure] + [Bit Depth]" [Video Standard]: 3G/DL/HD/SD [Sampling Structure]: 422 YCbCr/ 444 YCbCr/444 RGB/444 XYZ [Bit Depth]: 10/12 [I/PsF/P]: [Interlace] / [PsF] / [Progressive] You can confirm the same information using the STATUS button on the controller. For details, see "Displaying the Monitor Status Page" page 74 69 Adjustment Using the Menus