Sony CDP-CE535 Operating Instructions - Page 13

Playing CDs Locating a Specific Disc You can locate any disc before or while playing a disc. DISC 1 - 5 DISC CHECK · DISC SKIP DISC Number buttons ENTER · You can extend the playing time during scanning the discs Press DISC CHECK repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically. Notes • When you press the DISC CHECK button, the play mode automatically changes to ALL DISCS Continuous Play mode. • When you've opened the disc tray by pressing the EX-CHANGE button, you cannot use the DISC CHECK function. • Even if you press the DISC CHECK button while "REPEAT" appears in the display (see page 14), the player stops after scanning all the discs once. DISC SKIP +/- To locate Press The next disc DISC SKIP while playing a disc The next or succeeding discs Z DISC SKIP + repeatedly until you find the disc The current or preceding discs Z DISC SKIP - repeatedly until you find the disc A specific disc directly DISC 1 - 5. When using the remote, follow the procedure below. 1 Press DISC. 2 Press the number button of the disc. 3 Press ENTER. A disc while checking the labels DISC CHECK while the disc tray is open. The disc tray turns to show you each disc label. When the disc you want comes in front of you, press · to continue playing. A disc by scanning the first track of each disc for 10 seconds DISC CHECK before you start playing while the disc tray is closed. When you find the disc you want, press · to continue playing. 13