Sony CDP-CE535 Operating Instructions - Page 19
Loading Memo
View all Sony CDP-CE535 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Playing CDs To Pause Stop play Locate a disc while the second player is set to Continuous Play mode Locate a track You need to Press P Press p Turn ≠ AMS (DISC) ± until the display shows the disc number you want, then push ≠ AMS (DISC) ± Press 0 (-AMS+) ) until the display shows the track number you want • To do other operations, use the controls on the second player or the supplied remote. • The AMS buttons (=/+) and search buttons (0/)) on the remote operate the second player as indicated on the remote. To control the second player directly using the supplied remote Set CD 1/2/3 on the remote to CD 3 which is the same position as the COMMAND MODE selector on the rear panel of the second player. To control this player again Press MEGA CONTROL. The MEGA CONTROL button goes off and you can control this player. Notes • You cannot locate a particular point in a track of the second player using the controls on this player. • Some controls on this player work on the second player differently from they do to this player. Loading the Disc Memos of the second CD player If the second CD player has the Disc Memo function (see page 24), you can load the Disc Memos of the second CD player to this player's memory and display them on this player. 1 Press INPUT. 2 Turn ≠ AMS ± until "LOADING MEMO" appears in the display. ALL DISCS 12 DISC TRACK LOADING 345 MIN SEC MEMO CD1 12345 6 7 8 9 10 3 Push ≠ AMS ±. This player starts loading. (Loading takes about one minute.) Note If each Disc Memo of the second CD player has more than 12 characters, the first 12 characters of each are loaded to this player. Labeling discs of the second CD player You can label discs of the second CD player or change the Disc Memos loaded from the second CD player. 1 Press MEGA CONTROL. The MEGA CONTROL button lights up. 2 Press CONTINUE. 3 Turn ≠ AMS (DISC) ± to select the disc you want, then push ≠ AMS (DISC) ±. 4 Press INPUT. 5 Turn ≠ AMS (DISC) ± until " DISC MEMO" appears in the display, then push ≠ AMS (DISC) ±. 6 Input the new Disc Memo following the procedure in "Labeling Discs" on pages 24 to 26. Note The new Disc Memos are stored on this player's memory, so you cannot display them on the second CD player. 19